# physics

posted by .

In a solar water heater, energy from the Sun is gathered by water that circulates through tubes in a rooftop collector. The solar radiation enters the collector through a transparent cover and warms the water in the tubes; this water is pumped into a holding tank. Assume that the efficiency of the overall system is 24.0% (that is, 76% of the incident solar energy is lost from the system). What collector area (in square meters) is necessary to raise the temperature of 330 L of water in the tank from 21°C to 46°C in 2.7 h when the intensity of incident sunlight is 540 W/m2? The specific heat of water is 4186 J/kg·K. The density of water is 1.00 g/cm3.

## Similar Questions

1. ### physics

This refers to passive solar collector, where solar radiation is used to heat water. It is therefore not on the solar cells. What characteristics should solar collectors have, to function in an optimal way?
2. ### physics

This refers to passive solar collector, where solar radiation is used to heat water. It is therefore not on the solar cells. What characteristics should solar collectors have, to function in an optimal way?
3. ### physics

This refers to passive solar collector, where solar radiation is used to heat water. It is therefore not on the solar cells. What characteristics should solar collectors have, to function in an optimal way?
4. ### physics

In a solar water heater, energy from the Sun is gathered by water that circulates through tubes in a rooftop collector. The solar radiation enters the collector through a transparent cover and warms the water in the tubes; this water …
5. ### physics

In a solar water heater, energy from the Sun is gathered by water that circulates through tubes in a rooftop collector. The solar radiation enters the collector through a transparent cover and warms the water in the tubes; this water …
6. ### help Fast ( physics)

a 0.5 m^2 solar collector radiation from the sun and focuses it on 250g of water that is inially at 23 degrees . the average intensity of radiation arriving from the sun at this location is 550 Wm^-2. if you assume that this is collected …
7. ### Phyics

In a solar water heater, energy from the Sun is gathered by water that circulates through tubes in a rooftop collector. The solar radiation enters the collector through a transparent cover and warms the water in the tubes; this water …
8. ### Physics

A water heater is operated by solar power. If solar collector has an area of 6.00m^2, and the intensity delivered by sunlight is 550W/m^2, how long does it take to increase the temperature of 1m^3 of water from 20°Cto 60°C?
9. ### Maths

A solar heater with a collector area of 58.0 m2 is required to heat 2560 kg of water. Under the same conditions, how much water can be heated by a rectangular solar collector 9.50 m by 8.75 m?
10. ### physics

A solar collector is placed in direct sunlight where it absorbs energy at the rate of 780 J/s for each square meter of its surface. The emissivity of the solar collector is e = 0.76. What equilibrium temperature does the collector …

More Similar Questions