Physics

posted by .

If the specific volume of red brass is 0.001865 ft/3lb.
What would be the density?

Thanks!

  • Physics -

    I believe it would be 548lbs./cu.ft

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics HELP!!!!!!!!

    The brass bar and the aluminum bar in the drawing are each attached to an immovable wall. At 29°C the air gap between the rods is 2 x 10^-3 m. At what temperature will the gap be closed?
  2. physics

    One end of a wire is attached to a ceiling, and a solid brass ball is tied to the lower end. The tension in the wire is 160 N. What is the radius of the brass ball?
  3. CHEMISTRY

    brass is a subtitutional alloy consisting of a solution of copper and zinc. a particulae sample of red brass consisting of 80% copper and 20% zinc by mass has a density of 8750kg/m^3. a. what is the molality of zinc in the solid solution …
  4. Physics _ Please please help

    A hollow brass cylinder is weighed on a pan balance (kitchen scale) which read in kg. The scale reading is 5.56 kg. The brass cylinder is now removed from the scale and is replaced by a beaker of liquid density 1.56 * 10^3 kg/m^3; …
  5. PHYSICS

    A hollow brass cylinder is weighed on a pan balance (kitchen scale) which read in kg. The scale reading is 5.56 kg. The brass cylinder is now removed from the scale and is replaced by a beaker of liquid density 1.56 * 10^3 kg/m^3; …
  6. chemistry

    The density of brass is 8,600 kg/m3 or 8.6 g/mL. You have 2 kg of brass. What is the volume?
  7. physics

    Brass is an alloy made from copper & zinc. A 0.55 kg brass sample at 96.7 C is dropped into 2.19kg of water at 4.4C. If the equilibrium temp is 7.0C, what isthe specific heat of wter is 4186 j/kg C. Answer in units of J/kg C
  8. physics

    a brass cube of size 10cm is heated through 30 degree. if the linear expansivity of brass is 2.0*10^-5 k^-1. what is the increase in its volume?
  9. physics

    cant find much on how to solve problems like these. any help would be appreciated. A pressure of 6000 Pa is exerted on a wall of 12 square meters area. What force is exerted on the wall?
  10. Physics

    If you want to design a set of five density rods (made of aluminum, iron, copper, brass, and lead), determine the ratios of the lengths of each rod to the length of the lead rod, the densest material in the group. The specific gravities …

More Similar Questions