mechanical properties of materials
posted by dmkp .
A cylindrical steel bar is required to support a load of 650 N. the required bar must be 0.17 m in length and must not deform by more than 0.015 mm. given that the Young's modulus of steel is 210 GPa, calculate the minumum diameter of the bar.
Respond to this Question
Similar Questions

mechanical properties of materials
A cylindrical steel bar is required to support a load of 650 N. the required bar must be 0.17 m in length and must not deform by more than 0.015 mm. given that the Young's modulus of steel is 210 GPa, calculate the minumum diameter … 
mechanics of materials
A mild steel bar of width 10mm is subjected to a tensile stress of 3,0x105 Pa. Given that Young’s modulus for mild steel is 200 GPa and Poisson’s ration for mild steel is 0.31, calculate the change in width of the bar. Is the width … 
Physics
Tapered bar with end load The small tapered bar BC has length L=0.1 m and is made of a homogeneous material with Young’s modulus E=10 GPa. The cross sectional area of the bar is slowly varying between A0=160 mm^2 (at B) and A0/2 … 
Physics
Composite bar with end load (two segments) The composite bar BCD in the figure is composed of an inner aluminum cylindrical core of length 2L=2 m and radius R=1 cm and a sleeve of steel of length L=1 m and thickness R=1 cm surrounding … 
physic
The composite bar BCD in the figure is composed of an inner aluminum cylindrical core of length 2l=2m and radius R=1cm and a sleeve of steel of length L=1m and thickness R=1cm surrounding the aluminum core in the CD section of the … 
Physic
The builtin composite bar BC of length L=2 m is composed of two materials with equal cross sectional area A = 100 mm2. The first material has elastic modulus E=1 GPa. The second material is twice as stiff, with a modulus of 2E or … 
PHYSIC
The builtin composite bar BC of length L=2 m is composed of two materials with equal cross sectional area A = 100 mm2. The first material has elastic modulus E=1 GPa. The second material is twice as stiff, with a modulus of 2E or … 
Physics
The cylindrical bar in the figure has a total length L=1.2 m, a diameter d=15 mm, and is confined by fixed supports at the walls A and B. A concentrated axial load FC=30 kN is applied to the bar at point C as indicated in the figure, … 
Physic
A bar has a constant cross sectional area A. The bar is devided in 2 segments segment 1 (1/3 of the bar) and segment 2 (2/3 of the bar). Segment 1 is made of a material with mass density ρ and Young's modulus E. Segment 2 is made … 
strength of materials
The composite bar BCD in the figure is fixed at the wall B (x=0), and has constant cross sectional area A_0. The bar is composed by joining, at section C, two segments (BC and CD) of equal length L. Segment CD is homogeneous, made …