Math

posted by .

The following drill bits came in a typical set. Covert each bit size to millimeters (mm),rounding to nearest tenth of a millimeter. 1/16 in or 5/64in

  • Math -

    1 inch = 25.4 mm (exactly)
    so 1/16" = (1/16)*25.4 = 1.5875 mm
    Can you round to the nearest 0.1 mm?

  • Math -

    yes to 1.6

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Math

    A 1/2 inch drill bit is too large for a job, while a 3/8 inch bit is too small. What size bit should be tried next?
  2. math

    18 Estimate 8128 /18 by first rounding each number so that it has only nonzero digit. 20. Find the digits in the tens place, in the tenths place, and in the ten thousandths place for the following number. 465.2587 21. Round 0.681 to …
  3. math

    Round 0.681 to the nearest tenth. question 2: Estimate 17.64+9.213 by first rounding each number to the nearest tenth.
  4. math

    A micro-millimeter is defined as one millionth of a millimeter. A length of 17 micro-millimeters may be represented as A. .00017 mm. B. .0000017 mm. C. .000017 mm. D. .00000017 mm.
  5. Math

    Solve the following triangle, rounding side lengths to the nearest tenth of a unit and angle measures to the nearest degree. angle a = 153 degrees, b= 5, a=10.5
  6. algebra

    Lead shielding is used to contain radiation. The percentage of a certain radiation that can penetrate x millimeters of lead shielding is given by I(x) = 100e^−1.5x. What percentage of radiation, to the nearest tenth of a percent, …
  7. math

    Lead shielding is used to contain radiation. The percentage of a certain radiation that can penetrate x millimeters of lead shielding is given by I(x) = 100e^−1.5x. What percentage of radiation, to the nearest tenth of a percent, …
  8. algebra

    Lead shielding is used to contain radiation. The percentage of a certain radiation that can penetrate x millimeters of lead shielding is given by I(x) = 100e^−1.5x. What percentage of radiation, to the nearest tenth of a percent, …
  9. Math

    According to the Royal Canadian. Mint Act, a 50-cent Canadian coin must have a diameter of. 27.13 millimeters. What is the ... tenth of a square millimeter?
  10. Physics uncertainties

    A flat head drill bit is used to drill holes of small depth. The drill bit can drill holes with a diameter size of (40 ± 0.5)mm. The depth of the hole has an uncertainty of ±1mm. If the total percentage uncertainty of the volume …

More Similar Questions