# science

posted by .

you read about a rope and pulley machine that was able to produce equal amounts of output work. was this a realistic example why or why not?

• science -

No becuze all ur work is focused on the rope and pulling it and all the pully machine is doing is going up the rope becuze of the force of u pulling the rope. :)

## Similar Questions

1. ### science

percentages: to use a machine,u must do the work on the machine called input work. the machine then foes the work on and object called output work. not all the input work gets transmitted to output work. some work is lost due to friction …
2. ### science

For a machine with an efficiency of 80%, what is the work output of the machine if its work input is 2,000 joules?
3. ### physics

A 3 lb bucket containing 40 lb of water is hanging at the end of a 20 ft rope that weighs 4 oz/ft. The other end of the rope is attached to a pulley. How much work is required to wind the length of rope into the pulley, assuming that …
4. ### Math

A factory has 3 machines that produce the same item. Machines 1 and 2 each produce 30% of the total output, while machines 3 produce 40%. It is known that 6% of Machine 1's output is defective, while machine 2 produces 5% defective …
5. ### physical science

Using Fig. 4.28 as an example, how much applied force would the man need to have to pull the block (weight or output force = 500 N) if the rope he is holding is 7 m long and the rope on the pulley is 2 m long?
6. ### science

you read about a rope and pulley machine that was able to produce equal amounts of output work. was this a realistic example why or why not?
7. ### PHYSICAL

A SIMPLE MACHINE PRODUCE 25 JOULES, WHAT IS THE OUTPUT WORK FOR EVERY 50 JOULES OF INPUT WORK. WHAT IS THE EFFICIENCY OF THIS MACHINE?
8. ### college physics

an atwood machine is constructed by mounting a well-lubricated pulley (not necessarily a ring/disc), whose radius is 6.00cm on an axle and passing a rope over the pulley. Each end of the rope is attached to a different mass of 3.0 …
9. ### Physics

elbow raises a 1200 N piano a distance of 5 meters using a set of pulleys. elbow pulls in 20.0 meter of rope while exerting a force of 340 N. a) what is the work output?
10. ### physics

Consider the system shown in the diagram. The pulley is a uniform cylinder with mass m3 = 0.60 kg and radius R = 4.0 cm, the other two masses are m1 = 2.5 kg and m2 = 1.0 kg, and รก = 30o. Assume the rope is massless, there is no slipping …

More Similar Questions