science

posted by .

a reference solution is to be prepared with 5PPM parabenzopyrene(252 mol. wt.)the quantity of parabenzopyrene required for preparing one litre 5PPM solution is

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Chem

    Calculate the concentration in mol per litre of ammonium ions in a solution solution prepared by mixing 360.0mL of 0.250 mol per litre ammonium sulphate solution with 675.0mL of 1.20mol per litre ammonium nitrate solution. Assume solution …
  2. Chemistry

    A laboratory technician is required to prepare a quarter normal saline solution (0.22% w/v) from the stock normal saline solution. 1. What is the dilution factor required?
  3. A.P. Environmental Sciences

    .5 grams of pure copper sulfate powder and 2L of water were used to create a copper sulfate solution with a concentration .5ppm. How was this done?
  4. Math - urgent

    2. A technician has prepared three solutions from a 600 mL stock solution. • In preparing the first solution ½ of the original volume of the stock solution was used. • The second solution required ¼ of the remaining stock solution. …
  5. Fractions

    A technician has prepared three solutions from a 600 mL stock solution. • In preparing the first solution ½ of the original volume of the stock solution was used. • The second solution required ¼ of the remaining stock solution. …
  6. kv

    A reference solution is to be prepared with 5 PPM parabenzopyrene (molecular weight = 252). The quantity of parabenzopyrene required for preparing one litre 5 PPM solution is
  7. Chemistry

    A reference solution is to be prepared with 5 PPM parabenzopyrene (molecular weight = 252). The quantity of parabenzopyrene required for preparing one litre 5 PPM solution is (A) 252 mg (B) 25.2 mg (C) 5 mg (D) 252 g
  8. chemistry

    Two solutions were prepared. The first was a 0.672 M solution of aluminum hydroxide and the second was a 0.405 M sulfuric acid solution. 1.) If a total of 500 mL of aluminum hydroxide solution was prepared, how many grams of the solute …
  9. Chemistry

    4 Questions on molarity that I really don't understand. I have the formulas, but they don't seem to fit in to the question right. Please take a look, thanks! 1. Calculate the weight, in grams, of HNO3 present in 1.0 litre of 0.10M …
  10. Chemistry

    Assume you have prepared 100.0 mL of a buffer solution using 0.400 mol of acetic acid (pKa = 4.74) and 0.400 mol of sodium acetate. The pH of this buffer solution is initially 4.74. After preparing this buffer solution, you added 55.0 …

More Similar Questions