PHYSICS
posted by ann .
What force must be exerted on the master cylinder of a hydraulic lift to support wt of a 2000 kg car resting on the slave cylinder? master : 2cm diameter,slave: 24cm diameter
Respond to this Question
Similar Questions

Engineering
You are given a hydraulic jack which you'd like to keep in your car in case you have a flat. Your vehicle weighs 4500lbs, and you know the jack will have to lift 1500 lbs when you put it under the axle. The hand end cylinder of the … 
physics
An automobile having a mass of 1750 kg is placed on a hydraulic lift in a garage. The piston lifting the car is 0.244 m in diameter. A mechanic attaches a pumping mechanism to a much smaller piston, 1.50 cm in diameter, which is connected … 
physics
A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston. pounds … 
physics
A hydraulic brake system is shown. The area of the piston in the master cylinder is 6.32 cm^2, and the area of the piston in the brake cylinder is 1.83 cm^2. The coeﬃcient of kinetic friction between the brake shoe and the wheel … 
hydraulic
a cylinder has a 3" diameter and a 17/8" diameter rod with 800psi. what is the force output of the cylinder extending and retracting 
maths
What length of a solid cylinder 2cm in diameter must be taken to recast into hollow cylinder of length 16cm,external diameter 2cm and thickness 2.5mm? 
physics
A certain hydraulic system is designed to exert a force 100 times as large as the one put into it. (a) What must be the ratio of the area of the slave cylinder to the area of the master cylinder? 
physics
A hydraulic cylinder has to overcome a force of 12,600 pounds on the extend stroke and 9,375 pounds on the return stroke. The maximum system pressure available is 2200 PSIG. What is the smallest diameter cylinder required to overcome … 
physics
An hydraulic press has an input cylinder of 2cm diameter and an output cylinder of 6cm diameter. Find the force exerted by the output piston when a force of 20N is applied to the input piston. 
Physics
A hydraulic press has an input cylinder 4.0cm in diameter and an output cylinder 16cm in diameter. (a) Assuming 100 percent efﬁciency, ﬁnd the force exerted by the output piston when a force of 170N is applied to the …