hydraulic

posted by .

a cylinder has a 3" diameter and a 1-7/8" diameter rod with 800psi.
what is the force output of the cylinder extending and retracting

  • hydraulic -

    800*PI*(1 7/8)^2=forceoutput*PI*(3)^2

    forceoutput=800*(1 7/8 / 3)^2

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    Three solid cylinder rods roll down a hill with the same linear speed. Rod R1 has a 1inch diamter, Rod R2 has a 2inch diameter, and Rod R3 has a 3inch diameter. They all have the same masses. Rank in order the rotational energies of …
  2. math

    A cylinder has a diameter of 80 cm and a length of 45 cm. Another cylinder has the same volume but is 80cm long. What is the diameter of the longer cylinder?
  3. Geometry

    a cone full of water has been poured intoa cylinder. what is the depth of thewater in the cylinder?
  4. physics

    A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston. pounds …
  5. STAT

    The inside diameter of a manufactured cylinder is believed to follow a normal distribution centered at 5.00 inches with standard deviation of .03 inches. The diameter of the cylinder must be within 4.95 inches (the lower specification …
  6. PHYSICS

    What force must be exerted on the master cylinder of a hydraulic lift to support wt of a 2000 kg car resting on the slave cylinder?
  7. physics

    A hydraulic cylinder has to overcome a force of 12,600 pounds on the extend stroke and 9,375 pounds on the return stroke. The maximum system pressure available is 2200 PSIG. What is the smallest diameter cylinder required to overcome …
  8. physics

    An hydraulic press has an input cylinder of 2cm diameter and an output cylinder of 6cm diameter. Find the force exerted by the output piston when a force of 20N is applied to the input piston.
  9. Physics

    A hydraulic press has an input cylinder 4.0cm in diameter and an output cylinder 16cm in diameter. (a) Assuming 100 percent efficiency, find the force exerted by the output piston when a force of 170N is applied to the …
  10. Maths

    Cylinder A is eight time as tall as cylinder B, but the diameter of cylinder B is four times the diameter of the cylinder A. Which cylinder has larger volume?

More Similar Questions