Physics

posted by .

A shear force of 3.1 105 N is applied to an aluminum bar of length L = 19 cm, width w = 5.2 cm, and height h = 2.3 cm as shown in the figure below. What is the shear deformation Äx?____m

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    Find the shear strain that results if a force of magnitude 9.00×105 is applied to the top square face of the plate, parallel to the side, and a force of equal magnitude is applied in the opposite direction to the bottom face of the …
  2. Physics

    Composite bar with end load (two segments) The composite bar BCD in the figure is composed of an inner aluminum cylindrical core of length 2L=2 m and radius R=1 cm and a sleeve of steel of length L=1 m and thickness R=1 cm surrounding …
  3. physic

    The composite bar BCD in the figure is composed of an inner aluminum cylindrical core of length 2l=2m and radius R=1cm and a sleeve of steel of length L=1m and thickness R=1cm surrounding the aluminum core in the CD section of the …
  4. Physic

    The composite bar BCD in the figure is composed of an inner aluminum cylindrical core of length 2L=2 m and radius R=1 cm, and a sleeve of steel of length L=1 m and thickness R=1 cm surrounding the aluminum core in the CD section of …
  5. physics

    Bar AB has length L, constant thickness d, and a width that tapers linearly from 3d at its fixed end (A) to d at its free end (B; see the figure below). The bar is homogeneous with mass density ρ and Young's modulus E. When hung …
  6. vector mechanics- dynamics

    The slender bar AB weights 8 kg and moves in the xy plane, with its ends constrained to follow the smooth horizontal and vertical guides as shown in Figure Qi. By assuming the bar AB is initially at rest; a) Calculate the angular acceleration …
  7. Materials Science

    A 3-point bending test is performed on a simply supported beam of length L=4m and of rectangular cross-section, with width b and height h. For a central load of 10kN, draw the bending moment and shear force diagrams for the beam. Then …
  8. Physics

    A 25.0 m tall hollow aluminum flagpole is equivalent in strength to a solid cylinder of aluminum 3.50 cm in diameter. A strong wind bends the pole much as a horizontal force of 900 N exerted at the top would. How far to the side does …
  9. Physics

    Hi everybody! I really need help with this problem as soon as possible... SI SHAFT WITH VARIABLE SECTION The shaft BCD in the figure has length L and is composed of a homogeneous material with shear modulus G. The bar is fixed between …
  10. Mechanics

    The shaft BCD in the figure has length L and is composed of a homogeneous material with shear modulus G. The bar is fixed between walls at B (x=0) and D (x=L). The shaft has a round cross section, with outer radius changing along the …

More Similar Questions