posted by .

How many mL of 6.00 ppm solution are needed to make 4.00 L of a 0.100 ppm solution?

  • Chemistry -

    c1v1 = c2v2
    c = concn
    v = volume
    6.00*v1 = 0.1 * 4.00 L
    Solve for v1 which will be in L.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. chem

    How would u prepare each of the following solutions 100 mL of a 245 ppm solution of urea, CH4N2O, in water and How would u prepare each of the following solution 100 mL of an aqueous solution whose K+ concentration is 0.084 M Write …
  2. Chemistry

    Carbon dioxide gas has a solubility of 0.0972 g/100 g H2O at 40 degrees celsius. Expressed in parts per million, this concentration is closest to... (1)0.972 ppm (2)9.72 ppm (3)97.2 ppm (4)972 ppm
  3. Chemistry

    A 200. gram sample of a salt solution contains 0.050 grams of NaCl. What is he concentration of the solution in parts per million?
  4. Chemistry

    what is the Fe concentration in ppm of a 10.00mL of 500 ppm Fe solution which has been diluted to 100ml?
  5. chemistry

    n the spectroscopic analysis of many substances, a series of standard solutions of known concentration are measured to generate a calibration curve. How would you prepare standard solutions containing 10.0, 25.0, 50.0, 75.0, and 100. …
  6. Chemistry

    What are the ppm of each of the atoms contained in a solution that is 655 ppm K3PO4?
  7. chemistry help

    If the standard calcium carbonate solution is 100 ppm and 25 mL of solution is used for the standardization, calculate the approximate volume of 2mM EDTA solution needed to reach the end point of the titration. I know to use M1V1=M2V2 …
  8. chemistry

    How much 35.6 M H2SO4 is needed to make a 1 L solution that is .007 ppm?
  9. Chemistry

    Caluculate the mass of ferrous ammonium sulfate (Fe(NH4)2(SO4)2.6H2O) you would need to add to a 4.0 mL volumetric flask to make a solution that is 75 ppm. I've already identified that Fe is 14.24% of the Mohr's salt, but how would …
  10. Analytical Chemistry

    I have a 0.00156 M solution of CuSO4*5H2O in water (from 0.0398 g of CuSO4*5H20 in 100 mL of water). How would I calculate the ppm of Cu of that solution from that information?

More Similar Questions