physics

posted by .

Water Flows upward throw the pipe shown in the diagram at 96 L/Min. If the pressure at the lower end is 80kPa, find the velocity of the water is at both ends and the pressure at the upper end. Assume that the density of water remains constant throughout the tube and that h1= 10 m and h2 = 13m

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?
  2. physics

    1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?
  3. physics

    1.)Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?
  4. physics

    1.)Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?
  5. Physics

    Water (density = 1.0 × 103 kg/m3) flows through a horizontal tapered pipe. At the wide end its speed is 4.0m/s and at the narrow end it is 5.0 m/s. The difference is pressure between the two ends is:
  6. PHYSICS!!!

    Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.70 105 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.22 …
  7. Physics

    Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.85x10^5 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.28X10^5 …
  8. Physics

    Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.85 105 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.28 …
  9. Physics

    Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.85 105 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.28 …
  10. Physics

    Water flows into one end of a horizontal, cylindrical pipe at 2.0 m/s. The pipe then narrows until its diameter at the opposite end is only 1/3 of that at the beginning. (a) What is the flow speed at the narrow end of the pipe?

More Similar Questions