Physics
posted by Trevor .
A 4.0 kg wheel of 20 cm radius of gyration is rotating at 360 rpm. The retarding frictional torque is .12 N.m. Compute the time it will take the wheel to coast to a rest.
Respond to this Question
Similar Questions

Physics
The combination of an applied force and a frictional force produces a constant total torque of 38.1 Nm on a wheel rotating about a fixed axis. The applied force acts for 7.00 s, during which time, the angular speed of the wheel increases … 
physics
A constant force of 20N is applied tangentially to a string wound on the rim of a 40 cm diameter wheel, initially at rest. (i) How much work does this force do as it turns the wheel through 45„a? 
Physics
I've been stuck on this problem for a while. Im not sure where to even begin. A bike wheel is rotating with an angular velocity of 3.1 rev/s. If the coefficient of kinetic friction between the wheel and brakes is .87, then find the … 
physics
When a 19.9 kg wheel with an angular speed of 3.10 rad/s is disconnected from a motor, a 0.124 N · m frictional torque slows the wheel to a stop. If the wheel has radius of 0.71 m, how long will it take for the wheel to come to rest … 
Physics
A 4.0 kg wheel of 20 cm radius of gyration is rotating at 360 rpm. The retarding frictional torque is .12 N.m. Compute the time it will take the wheel to coast to a rest. 
Physics
A 6 kg grinding wheel of radius 0.2 m rotates at a constant rotational frequency of 4 rad/s when an object makes contact with the outer edge of the wheel. Friction causes the wheel to stop in 2 seconds. What is the average torque on … 
Science
A 6 kg grinding wheel of radius 0.2 m rotates at a constant rotational frequency of 4 rad/s when an object makes contact with the outer edge of the wheel. Friction causes the wheel to stop in 2 seconds. What is the average torque on … 
mechanics
Find the total kinetic energy of a 1500 g wheel, 700 mm in diameter, rolling across a level surface at 650 rpm. Assume that the wheel can be considered as a hoop. (b) For the wheel in part (a), calculate the torque required to decrease … 
Physics
A student holds a bike wheel and starts it spinning with an initial angular speed of 7.0 rotations per second. The wheel is subject to some friction, so it gradually slows down. In the 10s period following the inital spin, the bike … 
Trigonometry
A point on the rim of a wheel of unknown radius in a pulley system has a velocity of 16 in/min. The wheel is making 4 rpm. If the radius of the other wheel is 8 inches, find the 8" wheel's rpms and the unknown wheel's radius. I got …