chemistry
posted by David .
The pressure in car tires is often measured in pounds per square inch (), with the recommended pressure being in the range of 25 to 45 . Suppose a tire has a pressure of 37.0 . Convert 37.0 to its equivalent in atmospheres.
Respond to this Question
Similar Questions

Statistics
Wrong tire pressure can increase tire wear and decrease gas mileage. A manufacturer of new tires tested the tire for wear at different pressures with the below results. Tire pressure (PPI:pounds per square inch) is related to how many … 
calcq
2 The earth’s atmospheric pressure p is often modeled by assuming that the rate dp/dh at Which p changes with the altitude h above sea level is proportional to p. Suppose that the pressure at sea level is 1013 millibars (about 14.7 … 
fluid
3. A students boot pressure on the ground is 5 pounds per inch squared. how many inches squared will be required to set off a landmine with a set pressure 40 pounds? 
sciencechemistry
a bicycle tire that has a volume of 0.85L is inflated to 140 pounds per square inch. What will be the pressure in the tire if the number of moles of gas is doubled? 
Physics
Your right rear tire has to support a weight of 3000 Newtons. Normally the contact area of your tire with the road is 200 square centimeters. If the pressure in your tire is suddenly reduced from 32 pounds per square inch to 16 pounds … 
chemistry
The pressure in car tires is often measured in pounds per square inch (), with the recommended pressure being in the range of 25 to 45 . Suppose a tire has a pressure of 33.5 . Convert 33.5 to its equivalent in atmospheres. 
statistics
To see whether people are keeping their car tires inflated to the correct level of 35 pounds per square inch (psi), a tire company manager selects a sample of 36 tires and checks the pressure. The mean of the sample is 33.5 psi, and … 
math
On Saturday, Alberto filled his right rear tire with air at the gas station around the block from where he lives. Three days later the tire pressure in that tire measured 26 psi (pounds per square inch). On the following Saturday, … 
chemistry
The pressure in car tires is often measured in pounds per square inch (lb/in. 2 ), with the recommended pressure being in the range of 25 to 45 lb/in. 2 . Suppose a tire has a pressure of 45.0lb/in. 2 . Convert 45.0lb/in. 2 to its … 
Physics
A friend asks you how much pressure is in your car tires. Unfortunately, you have misplaced your gauge but confident in your knowledge of physics you tell your friend “I can figure it out”. From the owner’s manual you find that …