# Physics

posted by .

Water (η = 1.00E-3 Pa*s) is flowing through a horizontal pipe with a volume flow rate of 0.0120 m3/s. As the figure below shows, there are two vertical tubes that project from the pipe. Assume that H = 0.0421 m and L = 0.706 m. Calculate the radius of the horizontal pipe.

• Physics -

Use Poiseuille's Law, and sub rho*g*h for (P2-P1)

## Similar Questions

1. ### physics

A 6.6 diameter horizontal pipe gradually narrows to 3.6 . When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 30.0 and 26.0 , respectively. What is the volume rate of flow?
2. ### Physics

Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.70 105 Pa and the pipe radius is 2.50 cm. At the higher point located at y = 2.50 m, the pressure is 1.30 …
3. ### PHYSICS!!!

Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.70 105 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.22 …
4. ### Physics

Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.85x10^5 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.28X10^5 …
5. ### Physics

Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.85 105 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.28 …
6. ### physics

Water (η = 1.00E-3 Pa·s) is flowing through a horizontal pipe with a volume flow rate of 0.0153 m3/s. As the drawing below shows, there are two vertical tubes that project from the pipe. Assume that H = 0.0477 m and L = 0.670 …
7. ### Physics

Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.85 105 Pa and the pipe radius is 2.80 cm. At the higher point located at y = 2.50 m, the pressure is 1.28 …
8. ### physics

The concepts that play roles in this problem are similar to those in Multiple-Concept Example 15, except the fluid here moves upward rather than remaining horizontal. A liquid is flowing through a horizontal pipe whose radius is 0.0215 …
9. ### physics

Water is flowing into a factory in a horizontal pipe with a radius of 0.0223 m at ground level. This pipe is then connected to another horizontal pipe with a radius of 0.0400 m on a floor of the factory that is 10.6 m higher. The connection …
10. ### Physics

A horizontal water pipe goes from a large diameter to a small diameter and then back to the first diameter as shown in the figure below. The level of water (8cm in the larger tube and 4 cm in the constricted tube) in the small vertical …

More Similar Questions