physics

posted by .

Proper design of automobile braking systems must account for heat buildup under heavy breaking. Calculate the thermal energy dissipated from brakes in a 1500 kg car that descends a 17° hill. The car begins braking when its speed is 95 km/h and slows to a speed of 35 km/h in a distance of 0.30 km measured along the road.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. science

    a car of mass 1360 kg descends from a hill of height 86 m at a constant speed of 20 km/h. assuming that all the potential/kinetic energy of the car goes into heat in the brakes, find the rise in temperature of the brakes (use the heat …
  2. Physics-energy

    Calculate the thermal energy dissipated from brakes in a 1310-kg car that descends a 13.5° hill. The car begins braking when its speed is 88 km/h and slows down to a speed of 34 km/h in a distance of 0.52 km measured along the road.
  3. Physics

    You are driving at the speed of 33.4 m/s (74.7296 mph) when suddenly the car in front of you (previously traveling at the same speed) brakes. Considering an average human reaction, you press your brakes 0.484 s later. Assume that the …
  4. physics

    Proper design of automobile braking systems must account for heat buildup under heaving braking. Calculate the thermal energy dissipated from brakes in a 1460-kg car that descends a 15.5° hill. The car begins braking when its speed …
  5. Physics

    A CAR HAS A MASS OF 1200KG TRAVELLING ON A LEVEL ROAD. THE CAR DECELERATED AT A RATE OF 10M/S^2 TILL THE CAR STOPPED. iT HAS TO OVERCOME A TOTAL RESISTANCE OF 400N WHILE BRAKING. (I) CALCULATE THE BRAKING FORCE OF THE CAR (II) WHAT …
  6. Physics

    Proper design of automobile braking systems must account for heat buildup under heaving braking. Calculate the thermal energy dissipated from brakes in a 1360-kg car that descends a 13.5° hill. The car begins braking when its speed …
  7. Physics

    An automobile is brought to a stop by applying friction brakes to the wheels. The brakes get hot; their thermal energy is increased. The decrease in kinetic of the car is equal to the increase in thermal energy of the brakes. According …
  8. engineering

    In an electric car, regenerative braking is used to recharge batteries. The principle of regenerative braking involves converting the kinetic energy of the vehicle into energy stored in a battery. If a car is traveling at a speed of …
  9. Physics

    A car starts from rest and travels for 10 seconds with a constant acceleration of 3.0 m s^-2. The driver then applies the brakes causing a negative acceleration of -4.0 m s^-2. Assuming that the brakes are applied for 2.0 seconds, …
  10. physics

    You are driving at the speed of 34.3 m/s (76.7433 mph) when suddenly the car in front of you (previously traveling at the same speed) brakes. Considering an average human reaction, you press the brakes 0.429 s later. Assume that the …

More Similar Questions