# texas A&M university

posted by .

A commonly used rule of thumb is that the average velocity in pipe should be about 1m/s or less"thin" fluids( viscosity about water). if pipe needs to deliver 6000m of water per day, what diameter is required to satisfy the 1-m/s rule?

• Physics math needs help -

Indicate your subject in the "School Subject" box, so those with expertise in the area will respond to the question.

## Similar Questions

1. ### physic

Water flows through a 4.0-cm-diameler horizontal pipe ata speed uf 1.3 m/s. The pipe then narrows down to a diameter of 2.0 cm. Ignoring viscosity, what is the pressure difference between the wide and narrow sections of the pipe
2. ### physics

A horizontal pipe 17.00 cm in diameter has a smooth reduction to a pipe 8.50 cm in diameter. If the pressure of the water in the larger pipe is 8.00 104 Pa and the pressure in the smaller pipe is 6.00 104 Pa, at what rate does water …
3. ### Physics

Water flows under pressure from one pipe into a second pipe having half the diameter. The volume flow rate in the narrow pipe is ________ that in the wide pipe, and the speed of the water in the narrow pipe is _______ that in the wide …
4. ### physics

A horizontal pipe carries oil whose coefficient of viscosity is 0.00010 ns/ m^{2}}. The diameter of the pipe is 5.5 cm, and its length is 60 m. What pressure difference is required between the ends of this pipe if the oil is to flow …
5. ### Science

I have no idea what to do, and the teacher wants the volumetric flow rate (in cm). A commonly used rule of thumb is that average velocity in a pipe should be about 1 m/s or less for "thin"(viscosity about water). If a pipe needs to …
6. ### Chemistry/Math

I'm not sure how to approach this problem. The teacher wants volumetric flow rate (in cm). A commonly used rule of thumb is that average velocity in a pipe should be about 1 m/s or less for "thin"(viscosity about water). If a pipe …
7. ### Chemistry/Math

I went to my teacher numerous times. I'm still not using the right formulas or equations. Please help. A commonly used rule of thumb is that average velocity in a pipe should be about 1 m/s or less for "thin" (viscosity about water). …
8. ### Fluid Mechanics

Water flows into a cylindrical tank through pipe 1 at a rate of 25 ft/s and leaves through pipe 2 at 10 ft/s and through pipe 3 at 12 ft/s. Pipe 4 is an open air vent. Internal diameters of the pipes are: D1=3 in, D2= 2 in, D3=2.5 …
9. ### Physics

A horizontal water pipe goes from a large diameter to a small diameter and then back to the first diameter as shown in the figure below. The level of water (8cm in the larger tube and 4 cm in the constricted tube) in the small vertical …
10. ### Physics

Please someone help..A horizontal pipe 10.0cm in diameter has a smooth reduction to a pipe 5.0cm in diameter. If the pressure of the water in the large pipe is 80000Pa and the pressure in the small pipe is 60000Pa at what rate does …

More Similar Questions