texas southern university

posted by .

A quantity of gas in a piston cylinder has a volume of 0.544 m3 and a pressure of 200 Pa. The piston compresses the gas to 0.126 m3 in an isothermal (constant-temperature) process. What is the final pressure of the gas?
??__Pa

  • texas southern university -

    p1•V1=p2•V2
    p2=p1•V1/V2

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics HELP!!!!!!!!

    Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 10-2 m2, and the pressure outside the …
  2. thermodynamic

    Energy is added to a piston-cylinder arrangement. The piston is withdrawn in such a way that the temperature remains constant. The initial pressure and volume are 200 KPa and 2m^3, respectively. If the final pressure is 100 KPa, determine …
  3. Physics

    A piston contains 1m^3 of helium at a temperature of 250 K and an absolute pressure of 1.0kPa. The following changes are made in sequence: (a) First the volume of the piston is decreased to 0.2 m^3 while the temperature is kept constant, …
  4. chemistry

    A gas is confined to a container with a massless piston at the top. (Part C figure) A massless wire is attached to the piston. When an external pressure of 2.00 atm is applied to the wire, the gas compresses from 4.90 to 2.45 L. When …
  5. Chemistry for Engineers

    A gas is confined to a container with a massless piston at the top. (Part C figure) A massless wire is attached to the piston. When an external pressure of 2.00 atm is applied to the wire, the gas compresses from 4.90 to 2.45 L. When …
  6. physical science

    If a quantity of gas in a piston cylinder has a volume of 0.9 m3 and is initially at room temperature (30°C) and is heated in an isobaric (constant-pressure) process, what will be the temperature of the gas in degrees Celsius when …
  7. thermodynamics

    A piston-cylinder device contains 100 g of ethylene gas initially at 27oC, 115 kPa. Ethylene is heated and the piston starts to rise until the volume reaches 90 L and merely touches a linear spring that has a spring constant of 60 …
  8. Thermodynamics

    Consider 2 kg of an ideal gas (R=300 J/(kg.K) and Cp=1000 J/(kgK)) contained in a piston cylinder arrangement. The cylinder has a small valve at the end opposite to the piston.The cylinder walls are not adiabatic and allow heat transfer. …
  9. physics

    A cylinder of gas is compressed by a piston from an initial volume of 125litres to a final volume of 90 litres.The compression occurs at constant pressure,and the work done on the gas by the piston is 10^4J.What is the gas pressure …
  10. Chemistry

    Consider a cylinder containing 2 mol of an ideal gas at an initial temperature of 25 C. The cylinder is fitted with a piston on which a weight is placed, subjecting the gas to a constant pressure of 2.66 atm. The cylidner is then wrapped …

More Similar Questions