Physics

posted by .

I need a step by step visual of how to do this question: A uniform horizontal beam 5.00m long and weighing 3.00x10^2 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53 degree with the horizontal. A person weighing 6.00x10^2 N stands 1.50 m from the wall.

a) Determine the magnitude of the tension in the cable. b) Determine the vertical forces exerted by the wall on the beam.

  • Physics -

    My cable tension is 833.5 Newtons. Can't go further if that's not right.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the …
  2. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the …
  3. Physics

    A 500N person stands 2.5m from a wall against which a horizontal beam is attached. The beam is 6m long and weighs 200N. A cable is attached to the free end of the beam and makes an angle of 45 to the horizontal and is attached to the …
  4. Phsyics(Please respond)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  5. Physics(Please help)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  6. Physics(Please, please check)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  7. physics

    A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The cable …
  8. physics

    The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle θ = 38o by a brace that is attached to a pin. The beam has a weight of 346 N. Three additional …
  9. physics

    A uniform horizontal beam 5.00 m long and weighting 2.88 102 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53.0° with the horizontal (Figure …
  10. physics

    A uniform beam weighing 1300N is attached to a vertical wall so that it is perfectly horizontal. the beam is 8 m long. A support race is anchored to the wall beneath the beam, making contact with the beam 3 m away from the wall at …

More Similar Questions