dyanmics PLEASE HELP!!!
posted by Emily .
This deals with a cam follower. The slotted bar rotates with constant angular velocity, theta=12 rad/s. The follower 'A' follows the circular cam as the bar rotates. The arm is pinned at a distance h=0.2m to the left of the cam's center. The radius of the cam is rc=0.42m.
Find the velocity of the follower when theta=40 degrees
a) in terms of polar coordinates
b) in terms of cartesian coordinates
Respond to this Question
Similar Questions

Physics
A 60cmlong, 500 g bar rotates in a horizontal plane on an axle that passes through the center of the bar. Compressed air is fed in through the axle, passes through a small hole down the length of the bar, and escapes as air jets … 
physics
at the instant shown, the 50 lb bar rotates clockwise 2 rad/s. The spring attached to its end always remains vertical due to the roller guide at C. If the spring has an unstretched length of 2 ft and a stiffness of k=6lb/ft, determine … 
Engineering
A 50 lb bar rotates clockwise 2 rad/s. The spring attached to its end always remains vertical due to the roller guide at C. If the spring has an unstretched length of 2 ft and a stiffness of k=6lb/ft, determine the angular velovity … 
physics
a wheel starts from rest and rotates with a constant angular acceleration and reaches an angular speed of 12 rad/sec in 3 sec. find the angle through which it rotates in this time. 
engineering
A slotted bar is attached to the origin and rotates in the horizontal plane with a constant angular velocity of 0.665 radians/s . The bar moves a roller weighing 33.6 lb along the cam's perimeter. A spring holds the roller in place; … 
Physics
Starting from rest, a disk rotates about its central axis with constant angular acceleration. In 6.00 s, it rotates 28.0 rad. During that time, what are the magnitudes of (a) the angular acceleration and (b) the average angular velocity? 
Theory of machine
Fill in the blanks: 1. A disc is spinning with an angular velocity w rad/sec about the axis of pin. The coupled to the causing precession will be ....... 2. The swaying couple is due to the ...... unbalanced force. 3.All pairs are … 
dynamics
This deals with a cam follower. The slotted bar rotates with constant angular velocity, theta=12 rad/s. The follower 'A' follows the circular cam as the bar rotates. The arm is pinned at a distance h=0.2m to the left of the cam's center. … 
physics
A wheel starts from rest and rotates with constant angular acceleration and reaches an angular speed of 12.0 rad/s in 3.00 s. Find the angle (in radians) throuh which it rotates in this time. 
nddu
a bar on a hinge starts from rest and rotates with an angular acceleration α = 10 + 6t, where α is in rad/s and t is in seconds. determine the angle in radians through which the bar turns in the first 4.00s