Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
if a wire of length 12cm it stress up to 25m what will be the final resistance .it initial resistance is 16ohm?
1 answer
umm i will help you just go to google look up the question
You can
ask a new question
or
answer this question
.
Similar Questions
1. A force of 40N at the end of a wire of length 4m and diameter 2mm process and extension of 0.24mm. Calculate; (a) stress on
Top answer:
r = 10^-3 meters stress = F/area = 40/ (pi r^2) = 40 /( pi * 10^-6) strain = elongation/length =
Read more.
A force of 40n is applied m at the end of a wire of length 4m and a diameter of 2.0mm process an extension of 0.24mm calculate
Top answer:
To solve this problem, we need to use the formulas for stress, strain, and Young's modulus. Let's
Read more.
A wire of length 5.0 m and diameter 2.0 mm extends by 0.25 mm when a force of 50 N was used to stretch it from its end.
Top answer:
12.7
Read more.
. A copper wire 1.00 mm in diameter is used to support a mass of 6.0 kg. If the wire was stretched by 2.00 mm, what was the
Top answer:
To solve this problem, we can use the formula Y = stress/strain. In this case, stress is the force
Read more.
A force of 40N applied at the end of a wire of length 4m and diameter 2.00m process and extension of 0.24mm. Calculate the
Top answer:
To calculate the stress of the wire, we need to find the cross-sectional area of the wire. The
Read more.
A wire of length 5.0m and diameter 2.0mm extends by 0.25mm when a force of 50N was used to stretch it from its end. Calculate
Top answer:
F = k x 50 = k * 0.25 *10^-3 meters k = 2*10^5 Newtons/meter (Surely they asked)
Read more.
A wire of length 5.0m and diameter 2.0mm extends by 0.025mm when a force of 50N was used to stretch it from one end. Calculate:
a
Top answer:
To solve this problem, we need to use the formulas related to stress, strain, and Young's modulus.
Read more.
A weight of 40N was attached to the end of a wire during modulus experiment, if the length of the wire is 4m and the diameter is
Top answer:
stress= 40n /area so it depends the units. If you want Pascal (N/m^2), then strss=
Read more.
A weight of 40N was attached to the end of a wire during modulus experiment, if the length of the wire is 4m and the diameter is
Top answer:
The strain is: epsilon = (extension)/(length) = 0.30 mm/4000 mm = 7.50*10^-5 The stress is sigma =
Read more.
A wire is in the shape of a square of side 10cm. If the wire is rebent in to a rectangle of length 12cm.find its breadth which
Top answer:
Length of wire: Perimeter of square = 4*side = 4*10 = 40cm Original area: Area of square = (side)^2
Read more.
Related Questions
A wire of 5.0m and diameter 2.0mm,extends by 0.25mm when a force of 50N was stretch it from it's end calculate
a.the stress on
A force of 40N is applied at the end of a wire 4m long and produces an extension of 0.24mm. If the diameter of the wire is
Find the diameter of an 18 m(L) long steel wire that will stretch no more than.009 m
AL when a load stress of 3800 N is hung on
A wire of initial length L0 and radius r0 has a measured resistance of 2.5 . The wire is drawn under tensile stress to a new
Copper has a breaking stress of about
3 × 10^8 N/m2. What is the maximum load that can be hung from a copper wire of diameter
Meg mesured the length of some pieces of wire. What is the difference in length between the longest and the shortest piece of
A force of 40N is applied at the end of a wire 4m long and it produces an extension of 0.24mm.if the diameter of the wire is
A wire is bent into a rectangle. The ratio of the length of the rectangle to its breadth is 9:5. If the total length of the wire
You apply a potential difference of 5.00 V between the ends of a wire that is 2.65 m in length and 0.654 mm in radius. The
which statement is not true
a. some people do not have stress b. stress is normal and can be positive or negative c. over a long