Physics

posted by .

A motor is rated to deliver 10.0kW. At what speed can this motor raise a mass of 2.75x10^4kg?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Electricity

    A motor running at its rated power provides 2.6 lb-ft torque at its rated speed of 2020 rpm. The motor draws 5.6-A from a 230-V supply at a phase angle of 37 degrees. Determine the following: The horsepower delivered by the motor, …
  2. College Physics

    A 315 kg object is lifted 12 meters by a motor in 15 seconds. How much power does the motor deliver?
  3. College Physics

    A 315 kg object is lifted 12 meters by a motor in 15 seconds. How much power does the motor deliver?
  4. Physics

    An electric motor is rated to have a maximum power output of 0.72 hp. If this motor is being used to lift a crate of mass 188 kg, how fast (i.e., at what speed) can it lift the crate?
  5. algebra

    The power (P) required to run a motor is equal to the voltage (E) applied to that motor times the current (I) supplied to the motor. If the motor data says the motor uses 180 watts of power and the voltage applied to the motor is 120 …
  6. Physics

    If a 65 kilogram load was raised 6 meters in 60 seconds determine the minimum rated wattage of the motor needed to accomplish this assuming the motor is 75% efficient. give your answer in W.
  7. science

    A 750w motor might also be rated as a 0.5horsepower motor 1 horsepower motor 2 horsepower motor 10 horsepower motor
  8. Physics

    A motor outputs power of 500 watts and is used to raise a 5kg mass vertically at constant speed. How long in seconds does it take to raise the mass 15 meters?
  9. Physics

    Searches related to a motor lifts an elevator of mass m at constant speed. The power output of the motor is P and there are no frictional losses so that all the power output from the motor goes into lifting the elevator mass. What …
  10. Physics

    A motor lifts an elevator of mass m at constant speed. The power output of the motor is P and there are no frictional losses so that all the power output from the motor goes into lifting the elevator mass. What is the correct expression …

More Similar Questions