Post a New Question

physics

posted by .

a rod 300 cm long is hinged in a wall its weight is 50N. it is supported by a leg from other edge and an external weight of 80N is placed on the rod 50 cm away from the leg end.. find the tension in the leg?

  • physics -

    I don't get the picture

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    One end of a uniform 4.0-m long rod of weight is supported by a cable. the other end rests against the wall, where it is helf by friction. The co-efficient of static friction between the wall and the rod is .50 Determine the minimum …
  2. physics

    a 51.0 kg uniform square sign, of edge L = 2.00 m, is hung from a horizontal rod of length dh = 3.00 m and negligible mass. A cable is attached to the end of the rod and to a point on the wall at distance dv = 4.00 m above the point …
  3. Physics

    A thin, uniform rod is hinged at its midpoint. To begin with, one half of the rod is bent upward and is perpendicular to the other half. This bent object is rotating at an angular velocity of 6.8 rad/s about an axis that is perpendicular …
  4. science-physics

    A worker sits at one end of a 183-N uniform rod that is 2.80 m long. A weight of 107 N is placed at the other end of the rod. The rod is balanced when the pivot is 0.670 m from the worker. Calculate the weight of the worker
  5. Physics

    One end of a uniform 3.20-m-long rod of weight Fg is supported by a cable at an angle of θ = 37° with the rod. The other end rests against the wall, where it is held by friction as shown in the figure below. The coefficient of …
  6. physics

    A thin, uniform rod is hinged at its midpoint. To begin with, one-half of the rod is bent upward and is perpendicular to the other half. This bent object is rotating at an angular velocity of 7.1 rad/s about an axis that is perpendicular …
  7. Physics

    A uniform rod of weight 5N and lenght 1m is pivoted at a point of 20 cm from one of its ends. A weight is hung from the other end so that te rod balances horizontally. What is the value of the weight?
  8. Physics

    A worker sits at one end of a 199-N uniform rod that is 2.80 m long. A weight of 120 N is placed at the other end of the rod. The rod is balanced when the pivot is 0.630 m from the worker. Calculate the weight of the worker
  9. Physics

    A uniform rod is 4m long and weighs 10 kg.if it is supported on a knife edge at one metre from the end what weight placed at that end keeps the rod horizontal?
  10. Science physics

    A uniform metres rod of weight 100N carries a weight of 40N and 60N suspended from the 20Cm and 90cm marks respectively, where will your pivot a knife edge to balance the rod.

More Similar Questions

Post a New Question