Math
posted by Troy .
If a 3/8" drill bit is rotating clockwise at 1300 RPM and the bit shatters, at what speed will the projectile be traveling outward?

Math 
Steve
radius is 3/16 in
speed of edge of drill bit: 1300 rev/min * (2pi*3/16) in/rev = 1531.5 in/min
Respond to this Question
Similar Questions

Math
A 1/2 inch drill bit is too large for a job, while a 3/8 inch bit is too small. What size bit should be tried next? 
physics
A variablespeed drill, initially turning at 500 rpm, speeds up to 1300 rpm in a time interval of 0.8 s. What is its average rotational acceleration? 
Math
Mr. Munoz has a 1/16 inch drill bit and a 3/32 inch drill bit. Which will make a bigger hole? 
Physics
A dentist causes the bit of a highspeed drill to accelerate from an angular speed of 1.20 104 rad/s to an angular speed of 3.14 104 rad/s. In the process, the bit turns through 1.92 104 rad. Assuming a constant angular acceleration, … 
Physics
A dentist causes the bit of a highspeed drill to accelerate from an angular speed of 1.20x10^4 rad/s to an angular speed of 3.14x10^4 rad/s. In the process, the bit turns through 1.92x10^4 rad. Assuming a constant angular acceleration, … 
physics
A dentist causes the bit of a highspeed drill to accelerate from an angular speed of 1.50 x 104 rad/s to an angular speed of 3.76 x 104 rad/s. In the process, the bit turns through 3.13 x 104 rad. Assuming a constant angular acceleration, … 
science
An unsecured astronaut is floating in deep space. He switches on a hand held drill. The drill bit begins rotating clockwise with high angular velocity. Describe what happens to the astronaut drill system and explain why. 
physics
A variablespeed drill, initially turning at 150 rpm, speeds up to 1300 rpm in a time interval of 1.0 s. What is its average rotational acceleration? 
physics
A variablespeed drill, initially turning at 150 rpm, speeds up to 1300 rpm in a time interval of 1.0 s. What is its average rotational acceleration? 
Physics uncertainties
A flat head drill bit is used to drill holes of small depth. The drill bit can drill holes with a diameter size of (40 ± 0.5)mm. The depth of the hole has an uncertainty of ±1mm. If the total percentage uncertainty of the volume …