posted by .

One operation of a mill is to cut pieces of steel into parts that will later be used as the frame for front seats in an automobile. The steel is cut with a diamond saw and requires
the resulting parts to be within ±0.005 inch of the length specified by the automobile company. The data in the file
comes from a sample of 100 steel parts. The measurement reported is the difference in inches between the actual
length of the steel part, as measured by a laser measurement device, and the specified length of the steel part. For example, the first value, 0.002, represents a steel part that is 0.002 inch shorter than the specified length.
a. Construct a percentage histogram.
b. Is the steel mill doing a good job in meeting the requirements set by the automobile company? Explain.

Steel File:

Error
-0.002
0.0005
0.0025
0.001
0.002
0.001
0.005
-0.002
0
0.001
-0.0025
-0.003
0.001
-0.0005
0
-0.003
-0.001
0.0005
0.0025
-0.0025
0.002
0.001
0.001
0.001
-0.002
-0.003
-0.0015
-0.0005
0
-0.0025
-0.003
-0.001
0.002
-0.001
0
0.003
0.0015
0
0
-0.0025
0.0005
0.001
0.0005
0.001
0.0025
0.001
0
-0.0025
-0.001
0.0035
0
-0.003
-0.002
-0.001
-0.0015
-0.0015
-0.002
0.001
-0.0025
-0.0005
-0.0015
-0.0005
-0.0015
-0.0005
-0.0005
-0.001
-0.0015
0.0025
0.001
0.0005
0
-0.002
-0.0005
0.0005
0.0005
0
-0.0005
0.002
0.001
-0.0015
-0.001
-0.001
0.0005
-0.0025
0.0025
0.002
0.0025
-0.002
0
-0.0005
-0.001
0
-0.002
0
0
0.002
-0.003
-0.0005
-0.002
-0.002

## Similar Questions

1. ### Math

I can't to get this problem. Perform the indicated operation 11 -6/7 -7 Can someone help me?
2. ### Calc

A wire 9 meters long is cut into two pieces. One piece is bent into a square for a frame for a stained glass ornament, while the other piece is bent into a circle for a TV antenna. To reduce storage space, where should the wire be …
3. ### MINIMIZATION PROBLEM (CALC)

A wire 9 meters long is cut into two pieces. One piece is bent into a square for a frame for a stained glass ornament, while the other piece is bent into a circle for a TV antenna. To reduce storage space, where should the wire be …
4. ### math

A florist uses wire frames to support flower arrangements displayed at weddings. Each frame is constructed from a wire length 9ft long that is cut into six pieces. the vertical edges of the frame consist of four of the pieces of wire …
5. ### statistic

One operation of a mill is to cut pieces of steel into parts that will later be used as the frame for front seats in an automobile. The steel is cut with a diamond saw and requires the resulting parts to be within ±0.005 inch of the …
6. ### Chemistry

The flame in a torch used to cut metal is produced by burning acetylene(C2H2) in pure oxygen. Assuming the combustion of 1 mole of acetylene releases 1251kj of heat, what mass of acetylene is needed to cut through a piece of steel …
7. ### Calculus

A wire 4 meters long is cut into two pieces. One piece is bent into a square for a frame for a stained glass ornament, while the other piece is bent into a circle for a TV antenna. To reduce storage space, where should the wire be …
8. ### Calculus

Bruce has commissioned the construction of an open-top rectangular tank to be fashioned from a 3m by 5m sheet of steel. Squares will be cut from each corner and sides will be bent upward to form the tank to be used for live bait storage. …
9. ### Calculus

A wire 7 meters long is cut into two pieces. One piece is bent into a square for a frame for a stained glass ornament, while the other piece is bent into a circle for a TV antenna. To reduce storage space, where should the wire be …
10. ### Math

OK I need help please I think it's 7 but not sure. If a circle is cut into 2 pieces. A triangle in 4 pieces ,a square into 5 pieces, what is next shape and how many pieces will be cut?

More Similar Questions