Math

posted by .

Mr. Munoz has a 1/16 inch drill bit and a 3/32 inch drill bit. Which will make a bigger hole?

  • Math -

    which is bigger, 2/32 or 3/32?

  • Math -

    3/32

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Math

    A 1/2 inch drill bit is too large for a job, while a 3/8 inch bit is too small. What size bit should be tried next?
  2. Physics

    An electric drill operates at a potential difference of 120V and draws a current of 1.5 Amps. If it takes 50 seconds to drill a hole in a piece of steel,calculate the amount of electrical energy used by the drill in that time.
  3. math

    A customer is buying a $100 drill and two $15 drill bit sets. The customer uses a gift card worth $50 to pay for a portion of their bill. How much cash will the customer pay (before taxes)?
  4. math

    A customer is buying a $100 drill and two $15 drill bit sets. The customer uses a gift card worth $50 to pay for a portion of their bill. How much cash will the customer pay (before taxes)?
  5. Math

    If a 3/8" drill bit is rotating clockwise at 1300 RPM and the bit shatters, at what speed will the projectile be traveling outward?
  6. Math

    A customer is buying a $100 drill and two $15 drill bit stes. The customer uses a $50 gift card for a portion of thier bill. How much cash will the customer pay (before taxes)?
  7. math

    •A customer is buying a $100 drill and two $15 drill bit sets. The customer uses a gift card worth $50 to pay for a portion of their bill. How much cash will the customer pay (before taxes)?
  8. science

    An unsecured astronaut is floating in deep space. He switches on a hand held drill. The drill bit begins rotating clockwise with high angular velocity. Describe what happens to the astronaut- drill system and explain why.
  9. Math

    You have a 5/16 in. drill bit. Will it drill a hole large enough to fit a 5 mm bolt?
  10. Physics uncertainties

    A flat head drill bit is used to drill holes of small depth. The drill bit can drill holes with a diameter size of (40 ± 0.5)mm. The depth of the hole has an uncertainty of ±1mm. If the total percentage uncertainty of the volume …

More Similar Questions