physics

posted by .

in a hypothetical thermometer, the freezing point of water is marked as -10 and the boiling point is marked at 70. What would be the reading if this thermometer is used to measure the temperature of 50 degree water?

  • physics -

    40 degrees

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Chemistry

    Why did we have to use the same thermometer for finding, the freezing point of both, solvent and solution?
  2. physics

    When an immersion glass thermometer is used to measure the temperature of a liquid, the temperature reading will be affected by an error due to heat transfer between the liquid and the thermometer. Suppose you want to measure the temperature …
  3. physics

    A thermometer of mass 0.0550 kg and of specific heat 0.837 kJ/kg•K reads 15.0°C. It is then completely immersed in 0.300 kg of water, and it comes to the same final temperature as the water. If the thermometer reads 44.0 °C, what …
  4. physics

    the steam point and ice point of a mercury thermometer are wrongly marked as 92 degree Celsius and 2 degree Celsius respectively.the correct temperature read by this thermometer is?
  5. engineering

    A thermometer is used to measure the temperature of a gas flow through a pipe. The gas temperature is read at 500°C and the duct temperature is measured to be 350°C. The thermometer is cylindrical with a diameter of 1 mm and an intrusion …
  6. Chemistry Plz Help

    Calculate the correct boiling point for nitrobenzene. Assume that a total immersion thermometer was used. The obs. boiling point was 205 degree celsius. The reflux ring in the test tube just reached up to the 0 degree celsius mark …
  7. physics

    Ideally, when a thermometer is used to measure the temperature of an object, the temperature of the object itself should not change. However, if a significant amount of heat flows from the object to the thermometer, the temperature …
  8. PHYSICS

    Ideally, when a thermometer is used to measure the temperature of an object, the temperature of the object itself should not change. However, if a significant amount of heat flows from the object to the thermometer, the temperature …
  9. Physics

    A faulty celcius thermometer read 0.7 degree celcius at the melting point of pure ice and 99.5 at the boiling point of water at normal pressure. Calculate the correct temperature when it reads 30 degree celcius. At what temperature …
  10. physics

    should the bulb of thermometer be completely immersed in boiling water to measure its boiling point

More Similar Questions