physics

posted by .

A weightless beam rests on two supports. The beam supports a weight of 120 newtons. What are the magnitudes of the forces on each end ( A & B) of the beam?

  • physics -

    IT depends on where the supports are, and where the weight is.

  • physics -

    the supports are on each end and the weight is in the middle

  • physics -

    Superb post. I just stumbled upon your blog and wanted to say that we have truly enjoyed reading through your web page posts. Any way I’ll be reeiitgrsng to your feed and that i hope you post once more soon.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A gymnast with mass m1 = 47 kg is on a balance beam that sits on (but is not attached to) two supports. The beam has a mass m2 = 118 kg and length L = 5 m. Each support is 1/3 of the way from each end. Initially the gymnast stands …
  2. physics

    A gymnast with mass m1 = 47 kg is on a balance beam that sits on (but is not attached to) two supports. The beam has a mass m2 = 118 kg and length L = 5 m. Each support is 1/3 of the way from each end. Initially the gymnast stands …
  3. Phsyics(Please respond)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  4. Physics(Please help)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  5. physics

    A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The cable …
  6. physics

    A steel beam that is 6.00 m long weighs 332 N. It rests on two supports, 3.00 m apart, with equal amounts of the beam extending from each end. Suki, who weighs 550 N, stands on the beam in the center and then walks toward one end. …
  7. physics

    A uniforbm beam 6m long weighing 4kg rest on supports at p and q placed left and right 10m from each end of the beam weights of mass 10kg and 8kg are placed near p and q respectively on each end of the beam . calculate the reactions …
  8. physics

    The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle θ = 38o by a brace that is attached to a pin. The beam has a weight of 346 N. Three additional …
  9. Science

    A uniform beam has a weight of 500N(acting at the centre of the beam). It also carries a point load of 1,2kN at the centre of the left half of the beam, and a point load of 820N at distance of one eighth of the beam's lenght from the …
  10. Physics

    A steel beam that is 7.00 m long weighs 352 N. It rests on two supports, 3.00 m apart, with equal amounts of the beam extending from each end. Suki, who weighs 595 N, stands on the beam in the center and then walks toward one end. …

More Similar Questions