science

posted by .

a u-tube is partially filled with water.oil which does not mix with water is next poured into one side until water rises by 2.5cm on the other side.if the density of oil be 0.8 ,the oil level will stand higher than the water level by how much?

  • science -

    ans is 12.50

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A 2.6 cm thick bar of soap is floating on a water surface so that 2.14 cm of the bar is underwater. Bath oil (of specific gravity 0.8)is poured into the water and floats on top of the water. What is the depth of the oil layer when …
  2. Physics

    A U-shaped tube is filled mostly with water, but some vegetable oil has been added to both sides of the U tube. On the right side of the tube, the depth of oil is 5.00 cm . On the left side of the tube, the depth of the oil is 2.30cm …
  3. Physics- PLEASE!!

    A U-shaped tube is filled mostly with water, but some vegetable oil has been added to both sides of the U tube. On the right side of the tube, the depth of oil is 5.00 cm . On the left side of the tube, the depth of the oil is 2.30 …
  4. PHYS101

    oil is added to the right hand arm of a U-tube containing water.The oil floats above the water to a height of h=10cm.The top of the oil+water column is a height d=2cm above the top of the water column in the other arm .Calculate the …
  5. physics

    Four tubes are set up in the lab at sea level as shown by the figure. The letter under each tube corresponds the question with the same letter. 1 atm = 101300 Pa = 101300 N/m2 ρwater = 1000 kg/m3 (a) What is the pressure pushing …
  6. Physics

    A bucket is filled with a combination of water (density 1,000 kg/m3) and oil (density 700 kg/m3). These fluids do not mix. (The oil will float on top of the water.) If the layer of oil is 63 cm tall, what is the pressure at the interface …
  7. chemistry

    Pipette 3 drops of oil into a test tube of water and shake. Describe what takes place and why?
  8. Physics

    A cubical block of wood 0.100 m on a side and with a density 550 kg/m^3 of floats in a jar of water. Oil with a density of 750 kg/m^3 is poured on the water until the top of the oil layer is 0.035 m below the top of the block. 1. How …
  9. Physics

    Salt water is poured into a U tube until it stands 0.250 m high in each arm. Oil is then added slowly to one arm until the salt water in the other arm stands 0.300 m high. The free surface of the oil then stands at 0.321 m high. (the …
  10. physics

    Please reference the following picture for this question: screenshots<dot>firefox<dot>com/V57wh6MYWUXfnx5M/brilliant<dot>org Initially, the U-tube shown above is filled with water, and the level on each side is l0. …

More Similar Questions