posted by .

an oil drum is 8ft high and 2 ft in diameter if the drum is half full how much is in cylinder. please show explanation

  • math -

    V = pi * r^2 * 8

    V = 3.14 * 1 * 8

    V = 25.14 cubic feet

    25.14 / 2 = ?_______ cu. ft.

  • math - correction -

    The volume is 25.12 cu. ft.

    25.12 / 2 = _____ cu. ft.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics Help!

    Q.1:What would a drummer do to make the sound of a drum give a note of lower pitch?
  2. PreCalculus

    I'm so confused... I've always been good at math but this year I'm just not getting it. But I know i can I always get help and a REAL explanation from the people on here so... A steel drum in the shape of a right circular cylinder …
  3. college algebra

    A steel drum in the shape of a right circular cylinder is required to have a volume of 100 cubic feet. express the amount of material required to make the drum as a function of the radius r of the cylinder. also how much material is …
  4. math - please help

    The 7 inch diameter drive drum of a belt conveyor is turning at 130 rpm. What is the belt speed (ft/min) if there is no slip between the belt and drum?
  5. Maths

    The circumference of the base of a cylindrical oil drum is 204cm. Calculate the diameter of the drum.
  6. math

    A drum is 2/3 filled with oil.15 litres of oil is removed from the drum. The drum is now 3/5 full, find the capacity of the drum in litres.
  7. Math

    A traditional Haida hand drum has a diameter of 14 7/8 in. and is 3 in deep. What is the minimum amount of hide used to make the drum if the hide covers only the top and lateral surfaces?
  8. physics please help

    A drum (see Figure 10.2) has a radius of 0.40 m and a moment of inertia of 2.3 kg ∙ m2. The frictional torque of the drum axle is A 14 m length of rope is wound around the rim. The drum is initially at rest. A constant force …
  9. maths

    A lift of mass 1500 kg is raised by means of a rope passing round a drum of diameter 1.50 m. Given that the lift is accelerating upwards at 0.255 m s-2, draw a free body diagram of the lift, calculate the tension in the rope, the moment …
  10. calculus 1

    (Thank you for any help because I am not good at setting up word problems) What are the dimensions that will minimize the amount of material needed to manufacture a standard oil drum that is in the shape of a cylinder, with closed …

More Similar Questions