physics

posted by .

The lowest resistance in a common electric circuit containing a common lamp is in which of these A) connecting wires.B) Both of these.C) Neither of these.D) lamp filament.

I would say lamp filament is this correct?

  • physics -

    A) connecting wires

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A 37 ohm lamp and a 59 ohm lamp are connected in series and placed across a potential of 43 V. What is the equivalent resistance of the circuit?
  2. physics

    1A) A filament lamp- cost- 80p effiency- 0.2 expected life- 1000 hours a compact fluorescent lamp (CFL)- cost- £3.00 effiency- 0.8 expected life- 8000 hours a filament lamp with a power rating of 100W gives 2000 units of light. what …
  3. physics! HELP!

    A filament lamp- cost- 80p effiency- 0.2 expected life- 1000 hours a compact fluorescent lamp (CFL)- cost- £3.00 effiency- 0.8 expected life- 8000 hours a filament lamp with a power rating of 100W gives 2000 units of light. what power …
  4. physics

    There are electrons in the filament of the ac lamp in your bedroom. When you turn on the lamp and it glows, the glowing comes from A) the positive charges that flow in the filament.B) the same electrons.C) different electrons; the …
  5. physics

    There are electrons in the filament of the ac lamp in your bedroom. When you turn on the lamp and it glows, the glowing comes from A) the positive charges that flow in the filament.B) the same electrons.C) different electrons; the …
  6. Physics

    A 100 W lamp is connected to 120 V, and its current is measured. A resistor is added to the lamp to reduce the current to half its original value. (a) What is the potential difference across the lamp?
  7. Physics

    A 100W incandescent lamp of filament area 45 mm^2, emits all its energy by radiation into the surrounding space of room at 22C. If the filament emissivity is 0.32, find the temperature of the filament?
  8. Physics ib

    What is the way to set up an electric circuit with a filament lamp, switch, battery, ohmmeter, voltmeter and variable resistor as to have the most optimal measurement for the current and voltage?
  9. physics

    filament lamp: cost-80p efficiency-0.2 expected life- 1000 hours compact fluorescent lamp (CFL): cost- £3.00 efficiency-0.8 expected life- 8000 hours A filament lamp with a power rating of 100 w gives 2000 units of light. what power …
  10. electronics and circuits

    A battery in combination with a dependent current source is connected to a lamp in the circuit shown below in Figure 6-1. The battery is modeled as a voltage source in series with a resistor, Rbat, and has an open circuit voltage of …

More Similar Questions