8th grade science

posted by .

The densities of four different woods are shown below.
Wood Sample Densities

Type of wood: African Teakwood
Density(g/cm3) 0.98

Type of wood: Balsa
Density(g/cm3) 0.14

Type of wood: Cedar
Density(g/cm3) 0.55

Type of wood: Ironwood
Density(g/cm3) 1.23


Which wood will sink when placed in a fluid with a density of 1.14 g/cm3?

a. African Teakwood

b. Balsa

c. Cedar

d. Ironwood

  • 8th grade science -

    All wood with a density greater than 1.14 g/cm^3 will sink.

  • 8th grade science -

    i donw this one before and the answer is b)Balsa

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Dobson

    a)The element with the greatest density is osmium, which has a density of 22.6g/cm3. Calculate the mass of 32.1 cm3 of osmium. b)A team of students determined the density of a sample of wood to be 0.52 g/cm3. A handbook of chemistry …
  2. Chemistry

    a) The element with the greatest density is osmium, which has a density of 22.6g/cm3. calculate the mass of 32.1 cm3 of osmium. Answer: 22.6g x 32.1 = 725.46 Did I have right answer?
  3. chemistry

    the density of a piece of wood is 0.638 g/cm3. The dimensions of the block of wood are 40.0 cm by 50.0 cm by 25.0 cm. What is the mass of the block of wood?
  4. PHYSICS

    A piece of wood is floating at the surface of some water as illustrated (the diagram is not to scale). The wood has a circular cross section and a height h = 4.0 cm. The density of water is 1.00 g/cm3. The distance y from the surface …
  5. Physics

    A cube of wood with a density of 0.780 g/cm3 is 10.0 cm on each side. When the cube is placed in water, what buoyant force acts on the wood?
  6. chemistry

    water has a density of 1g/cm3 ; if 2 different pieces of the wood are put into water which will float and which will sink ?
  7. physics

    Q.a cube of wood 20cm on each side,floats in water so that 30% is above the surface of the water,and 70% is below.what is the density of the wood(justify the answer) i.what mass of lead mass has to be placed on the top of the block …
  8. physics

    Q.A cube of wood 20cm on each side,floats in water so that 30% is above the surface of the water,and 70% is below. i.what is the density of the wood(justify the answer) ii.what mass of lead mass has to be placed on the top of the block …
  9. Science

    Based on the density of the wood V=15.625 m=10.00 D=.64g/cm3, would the wood float or sink if it is placed in a bowl of water?
  10. Science

    A block of wood has a mass of 120 g and volume of 200 cm3. What is the density of the wood?

More Similar Questions