Calculus (Definite Integrals  Force) Please Help
posted by Mishaka .
A cylindrical oil storage tank 12 feet in diameter and 17feet long is lying on its side. Suppose the tank is half full of oil weighing 85 lb per cubic foot. What's the total force on one endof the tank?

Answer is B 6120
Respond to this Question
Similar Questions

maths
A storage tank is in the shape of a right circular cylinder that has a diameter of 20 inches and a height of 3yards. if oil costs $2 per cubic foot, what does it cost to fill the storage tank oil? 
Calculus (Definite Integrals  Work)
Recall that work is defined to be force times distance, and that the weight (force) of a liquid is equal to its volume times its density. A fish tank has a rectangular base of width 2 feet and length 6 feet and sides of height 5 feet. … 
CALCULUS
A cylindrical oil storage tank 12 feet in diameter and 17feet long is lying on its side. Suppose the tank is half full of oil weighing 85 lb per cubic foot. What's the total force on one endof the tank? 
Math
An oil tank is the shape of an inverted right circular cone with the pointed end down. The tank is 15 feet tall and is 12 feet in diameter at the top. At 1:00pm, the tank has oil 5 feet deep in it. Oil is pouring in at 5 cubic feet … 
Trignometry
Suppose the ends of the cylindrical storage tank in the figure arc circles of radius 3 ft and the cylinder is 20 ft long. Determine the volume of the oil in the tank to the nearest cubic foot if the rod shows a depth of 2 ft. 
Calc
A cylindrical slime tank is placed so that the axis of the cylinder is horizontal. Find the fluid force on a circular end of the tank if the tank is half full, assuming that the diameter is 6 feet and the slime weighs 54 pounds per … 
Calculus
A spherical oil tank with a radius of 10 feet is half full of oil that weighs 60 pounds per cubic foot. Its top is 6 feet underground. How much work is needed to pump the oil out of the tank through a hole in its top? 
Physics/Calculus
A spherical oil tank with a radius of 10 feet is half full of oil that weighs 60 pounds per cubic foot. Its top is 6 feet underground. How much work is needed to pump the oil out of the tank through a hole in its top? 
math
The level of oil in a storage tank buried in the ground can be found in much the same way as a dipstick is used to determine the oil level in an automobile crankcase. Suppose the ends of the cylindrical storage tank are radius of 3ft … 
integral calculus
A cylindrical tank of radius 3 ft length 8 ft is laid out horizontally .The tank is half full of oil that weighs 60 pounds per cubic foot. a.)determine the work done in pumping out oil to the top of the tank. b.)determine the work …