geometry

posted by .

A hot air balloon is in the shape of a sphere. Approximately how much fabric was used to construct the balloon if its diameter is 32 feet? Use 3.14 for . Round to the nearest hundred square feet.

  • geometry -

    area of sphere = 4 pi r^2
    here r = 16 ft

    A = 4 * 3.14 * 256

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    Hot air balloons float in the air because of the difference in density between cold and hot air. In this problem, you will estimate the minimum temperature the gas inside the balloon needs to be, for it to take off. To do this, use …
  2. physics

    There are many ropes keeping a hot air balloon from floating away before a balloon race. One of these ropes is fixed to the ground at a 45° angle. Another is fixed to the ground at a 30° angle. If the hot air balloon is 18 feet off …
  3. geometry

    Hot air balloons require large amounts of both hot air and fabric material. A hot air balloon is spherical with a diameter of 25 feet . a. Does finding the surface area help you determine the amount of the hot air or the fabric material?
  4. science

    You are a maker of hot air balloons and wish to construct a balloon that will lift you and a friend to places unknown. Your standard balloon design is a perfectly spherical, nylon fabric balloon with a small hole on the bottom for …
  5. Physics :(( help please TT

    You are a maker of hot air balloons and wish to construct a balloon that will lift you and a friend to places unknown. Your standard balloon design is a perfectly spherical, nylon fabric balloon with a small hole on the bottom for …
  6. Physics

    A hot-air balloon is accelerating upward under the influence of two forces, its weight and the buoyant force. For simplicity, consider the weight to be only that of the hot air within the balloon, thus ignoring the balloon fabric and …
  7. Physics

    A hot-air balloon is accelerating upward under the influence of two forces, its weight and the buoyant force. For simplicity, consider the weight to be only that of the hot air within the balloon, thus ignoring the balloon fabric and …
  8. algebra

    a hot-air balloon is tethered to the ground and only moves up and down. You and a friend take a ride on the balloon for approximately 25 minutes. On this particular ride the velocity of the balloon, v(t) in feet per minute, as a function …
  9. math

    A hot air balloon was at a height of 60 feet above the ground when it began to ascend. The balloon climbed at a rate of 15 feet per minute. a) make a table that shows the height of the air balloon after climbing for 1,2,3,&4 minutes. …
  10. math- can you please check my work

    Can you please check my work. I asked this question yesterday but no one helped me. Thank you , I really appreciate it A hot air balloon was at a height of 60 feet above the ground when it began to ascend. The balloon climbed at a …

More Similar Questions