Heat Transfer

posted by .

Air flows along a 1 m long plate. If the temperature of flow is 0 deg Celsius and the surface temperature of plate is maintained at 30 deg Celsius. Evaluate the heat flow from the plate to air. What are the maximum thickness of the velocity boundary layer and thermal boundary layer? Where do they appear?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    The pressure in a constant-volume gas thermometer is 0.700atm at 100 deg. Celsius and 0.512atm at 0 deg. Celsius. a) What is the temperature when the pressure is 0.0550atm?
  2. Heat Transfer

    A fin 30 cm long & 10mm diameters throughout is made of steel alloy of thermal conductivity 43 W/m-deg. the fin attached to a plane heated wall at 200 deg.C temp. extends into surroundings at 25 deg.C.& Unit surface conductance of …
  3. Heat Transfer

    A fin 30 cm long & 10mm diameters throughout is made of steel alloy of thermal conductivity 43 W/m-deg. the fin attached to a plane heated wall at 200 deg.C temp. extends into surroundings at 25 deg.C.& Unit surface conductance of …
  4. HEAT TRANSFER

    The door of a domestic refrigerates has an area of 1.7 m2 & it basically consists of a thin metal sheet with a 25 mm thick layer of insulation on the inside. The thermal conductivity of this insulation is 0.25 W / m-deg & heat transfer …
  5. Heat Transfer

    A hot-wire anemometer is a temperature-based instrument for measuring velocities in a flowing gas. The key component of the device is a very fine wire (diameter = 0.0004 in., length = 0.20 in.) that is electrically heated. The wire …
  6. physics

    a 2.00kg copper plate with an initial temperature of 20.0 degrees Celsius slides with a constant velocity down a 150m long surface that is inclined at 30 degrees angle to the horizontal. If the mechanical energy lost by the system …
  7. Materials Transport

    You have a vertical plate which is 20 cm square and 0.75 cm thick. The plate has a thermal conductivity of 4 W/mK. The top edge of the plate is kept at a temperature of 325⁰C, and the bottom edge is kept at a temperature of 275⁰C. …
  8. Materials Transport

    You have a vertical plate which is 20 cm square and 0.75 cm thick. The plate has a thermal conductivity of 4 W/mK. The top edge of the plate is kept at a temperature of 325⁰C, and the bottom edge is kept at a temperature of 275⁰C. …
  9. Heat Transfer

    A 1 m square verticalplate is heated to 300 deg C and placed in room air at 25 Deg C. calculate the heat loss from the one side of the plate
  10. Physics

    Two metal plates with the same dimension are soldered together face to face. The face of plate 1 that is not touching plate two is keep at T1 = 106 0C. Similarly, plate 2 “open face” is keep at T2 = 0 0C. Assume the thickness of …

More Similar Questions