engineering
posted by Anonymous .
in a hydralic jack 1:5 ratio piston diameter,and we apply a fofce of 25kg,what can it lift.
Respond to this Question
Similar Questions

Engineering
Can anyone tell me the formula and what the symbols mean for the following problems? 
Engineering
You are given a hydraulic jack which you'd like to keep in your car in case you have a flat. Your vehicle weighs 4500lbs, and you know the jack will have to lift 1500 lbs when you put it under the axle. The hand end cylinder of the … 
science
A force of 625 N is applied to a hydraulic jack piston that is 0.04 m in diameter. If the piston which supports the load has a diameter of 0.60 m, how much mass can be lifted by the jack? 
math
in a hydralic jack 1:5 ratio diameter,and we apply a force of 25kg,what can it lift. 
PHYSICS
You are using a hydraulic jack to lift a 12000 Newton object. This input piston of your jack has a radius of 0.85 meters and you can exert a maximum of 3500 Newtons on it. How large does the radius of the output piston need to be in … 
physics
In a hydraulic piston set up, one circular piston has a diameter of 2 cm,while the other piston has a diameter of 6cm. Calculate the ratio of the force exerted by the larger piston to the force applied to the smaller piston? 
Physics
the input and output of hydraulic jack are respectively 1 cm and 4 cm in diameter. A lever with a mechanical advantage of 6 is used to apply force to the input piston. How much mass can the jack lift if a force of 180 N is applied … 
Physics
A hydraulic lift is used to jack a 780 kg car 15 cm off the floor. The diameter of the output piston is 15 cm, and the input force is 160 N. a)What is the area of the input piston (in m^2)? 
physics
If the input piston of a hydraulic jack has a radius of 0.005 m, what force is necessary to apply to it to lift a 1500kg car on the output piston whose radius is 0.5 m? 
physics
The small piston of a hydraulic lift has a diameter of 8 cm and its large piston has a diameter of 40cm. The lift raises a load of 15,000 Newtons. A. Determine the force that must be applied to the small piston. B. Determine the pressure …