physics

posted by .

A 1000-N crate resting on a surface is connected to a 500-N block through a frictionless pulley . Friction between the crate and surface is enough to keep the system at rest. What is the tension and friction in newtons?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A force F=180 N pulls a crate at a 60 degree angle on a rough surface. The weight of the crate is 296 N and the friction force between the crate and the surface is 90 N. What state of motion might the crate be in?
  2. Physics

    A 50 kg crate is initially at rest on a plane inclined at an angle of 30 degrees to the horizontal. A man then pulls the crate up the incline via a rope that is parallel to the inclined plane. The tension that the man imparts to the …
  3. physics

    A large crate filled with physics laboratory equipment must be moved up an incline onto a truck. 1. The crate is at rest on the incline. What can you say about the force of friction acting on the crate?
  4. physics

    A 1520-N crate is to be held in place on a ramp that rises at 30.0° above the horizontal. The massless rope attached to the crate makes a 22.0° angle above the surface of the ramp. The coefficients of friction between the crate and …
  5. Physics

    A crate of mass 50.0 kg rests on a flat surface, and there is a coefficient of static friction of 0.200 between the crate and the surface. A person pushed on the crate with a force of 5.00 N at an angle of 25.0 degrees below the horizontal. …
  6. Physics

    A block of mass m1 is on top of a block of mass m2. Block 2 is connected by an ideal rope passing through a pulley to a block of unknown mass m3 as shown. The pulley is massless and frictionless. There is friction between block 1 and …
  7. Physics.

    A 500 g block lies on a horizontal tabletop. The coefficient of kinetic friction between the block and the surface is 0.25. The block is connected by a massless string to the second block with a mass of 300 g. The string passes over …
  8. mechanics and fluids

    a block of mass 6 kg resting on a horizontal surface is connected by a cord passing over a light, frictionless pulley to a hanging block of mass 4 kg. the coefficient of kinetic friction between the block and the horizontal surface …
  9. phys

    Two blocks of mass m1 = 1.70 kg and m2 = 5.20 kg are connected by a massless cord passing over a frictionless pulley as shown in the figure below, with θ = 41.0°. The coefficient of kinetic friction between block 1 and the horizontal …
  10. Physics 11

    A 140 kg stationary crate is pulled by a force of 390 N along a horizontal surface. a) The coefficient of static friction between crate and surface is s = 0.25. Is the applied force large enough to begin moving the crate?

More Similar Questions