# physics

posted by .

Which of the statements regarding this situation are true? Select all that apply.

-In this simulation when the capacitor voltage is set to a positive value the top plate has a positive charge on it and the bottom plate has a negative charge on it.
-In general, decreasing the separation between the plates increases the magnitude of the electric field between the plates.
-Increasing the magnitude of the capacitor voltage while keeping the plate separation constant increases the magnitude of the electric field at all locations (except for locations where the field is zero, which remain at zero).
-Increasing the plate separation while keeping the capacitor voltage constant decreases the magnitude of the electric field at all locations.
-Reversing the sign of the capacitor voltage while keeping the magnitude of the voltage the same reverses the electric field at all locations, but does not change the magnitude of the field.
-Reversing the sign of the capacitor voltage while keeping the magnitude of the voltage the same reverses the vertical component of the electric field at all locations, but does not change the magnitude of the field or the horizontal component of the field at a given location.

• physics -

so what do you think, and why?

## Similar Questions

1. ### physics, help with circuits please!

Can the voltage across any of the three components in the R-L-C series circuit ever be larger than the maximum voltage supplied by the AC source?

Can the voltage across any of the three components in the R-L-C series circuit ever be larger than the maximum voltage supplied by the AC source?

Hi all. I posted earlier but I'm still stuck on part of this problem. I thought that statements 2 and 3 were correct below. But I got the problem wrong. Any help would be great! Can the voltage across any of the three components in …
4. ### Physics circuit help please!

Hi all. I posted earlier but I'm still stuck on part of this problem. I thought that statements 2 and 3 were correct below. But I got the problem wrong. Any help would be great! Can the voltage across any of the three components in …
5. ### Capacitance

A parallel plate capacitor with plates of area 320 cm.^2 is charged to a potential difference V and is then disconnected from the voltage source. When the plates are moved 0.3 cm. farther apart, the voltage between the plates is increased …
6. ### Capacitor

A parallel plate capacitor with plates of area 320 cm.^2 is charged to a potential difference V and is then disconnected from the voltage source. When the plates are moved 0.3 cm. farther apart, the voltage between the plates is increased …
7. ### Physics

Consider a charging capacitor made out of two identical circular conducting plates of radius 21 cm. The plates are separated by a distance 8 mm (note that d<<a). The bottom plate carries a positive charge Q(t)= Q0(1+t/T) with …
8. ### Physics

It takes 133 J of work to move 3 C of charge from the negative plate to the positive plate of a parallel plate capacitor. What voltage difference exists between the plates?
9. ### physics

A charged capacitor AB carries on its plate A a charge Q=-1.2mC What is the charge carried by plate B. Is the voltage U(AB)=V(A)-V(B) positive or negative, The plates A and B are connected to the terminals of a resistance R: the capacitor …
10. ### physics

A charged capacitor (AB) carries on its plate A a charge Q=-1.2mC a) What is the charge carried by plate B. b) Is the voltage U (AB)=V (A)-V (B) positive or negative. c) The plates A and B are connected to the terminals of a resistance …

More Similar Questions