physics

posted by .

A horizontal pipe carries oil whose coefficient of viscosity is 0.00010 ns/ m^{2}}. The diameter of the pipe is 5.5 cm, and its length is 60 m.

What pressure difference is required between the ends of this pipe if the oil is to flow with an average speed of 1.2 m/s?

What is the volume flow rate in this case?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physic

    Water flows through a 4.0-cm-diameler horizontal pipe ata speed uf 1.3 m/s. The pipe then narrows down to a diameter of 2.0 cm. Ignoring viscosity, what is the pressure difference between the wide and narrow sections of the pipe
  2. physics

    Water flows in a cylindrical, horizontal pipe. As the pipe widens to twice its initial diameter the pressure in the pipe changes. Calculate the change in pressure between the wide and narrow regions of the pipe. Give your answer as …
  3. physics

    A horizontal pipe of diameter 0.845 m has a smooth constriction to a section of diameter 0.507 m. The density of oil flowing in the pipe is 821 kg/m3 . If the pressure in the pipe is 8350 N/m2 and in the constricted section is 6262.5 …
  4. PHYSICS!!!

    A straight horizontal pipe with a diameter of 1.0 cm and a length of 46 m carries oil with a coefficient of viscosity of 0.11 N · s/m2. At the output of the pipe, the flow rate is 8.4 10-5 m3/s and the pressure is 1.0 atmosphere. …
  5. Physics

    A liquid of density 1.23 × 103 kg/m3 flows steadily through a pipe of varying diameter and height. At location 1 along the pipe the flow speed is 9.23 m/s and the pipe diameter is 1.07 × 101 cm. At location 2 the pipe diameter is …
  6. physics

    An oil gusher shoots crude oil 29.0 m into the air through a 0.100 m diameter pipe. Neglecting air resistance but not the resistance of the pipe, and assuming laminar flow, calculate the pressure at the entrance of the 55.0 m long …
  7. physics

    A horizontal pipe (Venturi Tube) 10.0 cm in diameter has a smooth reduction to a pipe 5.00 cm in diameter. If the pressure of the water in the larger pipe is 2.0 x 105 Pa and the pressure in the smaller pipe is 5.0 x 104 Pa, at what …
  8. physics

    A horizontal pipe (Venturi Tube) 10.0 cm in diameter has a smooth reduction to a pipe 5.00 cm in diameter. If the pressure of the water in the larger pipe is 8.0 x 105 Pa and the pressure in the smaller pipe is 3.0 x 104 Pa, at what …
  9. Physics

    Water flows into one end of a horizontal, cylindrical pipe at 2.0 m/s. The pipe then narrows until its diameter at the opposite end is only 1/3 of that at the beginning. (a) What is the flow speed at the narrow end of the pipe?
  10. Physics

    Please someone help..A horizontal pipe 10.0cm in diameter has a smooth reduction to a pipe 5.0cm in diameter. If the pressure of the water in the large pipe is 80000Pa and the pressure in the small pipe is 60000Pa at what rate does …

More Similar Questions