biology

posted by .

how many poeple prefer batteries than plugging a cable on the wall and why?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the …
  2. Science

    In the figure below, a uniform beam of weight 420 N and length 3.2 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least …
  3. physics

    a uniform beam of weight 420 N and length 3.2 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap …
  4. physics

    A sign with a mass of 1000.0 kg is suspended from a wall with a cable that is attached to the wall at a point 3 m above a horizontal beam that causes the sign to be a distance of 4 m from the wall. What is the tension in the cable?
  5. Physics

    A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the wall. …
  6. physics

    A cylindrical aluminum rod is attached to a wall by a hinge. A copper cable is attached to the rod at a point three-quarters of its length away from the wall and used to support the rod in a horizontal position. The diameter of the …
  7. physics

    A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The cable …
  8. physics

    A 9.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.0 m cable attached to the wall 4.0 m above the hinge, as shown below. The metal of the cable has test strength of 1.00 KN (kilo-Newton), which is the maximum …
  9. Physics

    A uniform beam of weight 245 N, and length L, sticks out from a vertical wall. A lightweight cable connects the end of the beam to the wall, making an angle of 65.0° between the beam and the cable. What is the tension in the cable?
  10. Physics

    In a repair shop a truck engine that has mass 429 kg is held in place by four light cables (Figure 1) . Cable A is horizontal, cables B and D are vertical, and cable C makes an angle of 37.1∘ with a vertical wall. Tension in …

More Similar Questions