# Physics check

posted by .

So I have an experiment and we have to find the mechanical advantage.

1. What is the MA when the load force is 7N and the effort force is 3N?

2. What is the MA when the load force is 7N and the effort force is 6N?

My answer for 1. is 2.34 and 2. is 1.17. Are these correct?

Also, why is the Mechanical advantage never equal to one? and what factors can affect the force that's required at a particular machine?

• Physics check -

correct. MA can be one. Ever been on a seesaw with the fulcurm in the middle?

## Similar Questions

1. ### Velocity Ratio

Does my work make sense? A turnbuckle is needed to apply an 8kN force on a cable. If the efficiency of the turnbuckle is 40% and the force applied is 159.155N with a lever of 20cm in length. a) Find the mechanical advantage. Mechanical
2. ### Please check my math

A turnbuckle is needed to apply an 8kN force on a cable. If the efficiency of the turnbuckle is 40% and the force applied is 159.155N with a lever of 20cm in length. a) Find the mechanical advantage. Mechanical Advantage=Load/Effort …
3. ### Physics

A turnbuckle is needed to apply an 8kN force on a cable. If the efficiency of the turnbuckle is 40% and the force applied is 159.155N with a lever of 20cm in length. a)Find Mechanical Advantage: M.A.=Load/Effort M.A.=8000/159.155 M.A.=50.265 …
4. ### Physics

A turnbuckle is needed to apply an 8kN force on a cable. If the efficiency of the turnbuckle is 40% and the force applied is 159.155N with a lever of 20cm in length. a)Find Mechanical Advantage: M.A.=Load/Effort M.A.=8000/159.155 M.A.=50.265 …
5. ### Physics (is this right?)

A turnbuckle is needed to apply an 8kN force on a cable. If the efficiency of the turnbuckle is 40% and the force applied is 159.155N with a lever of 20cm in length. a)Find Mechanical Advantage: M.A.=Load/Effort M.A.=8000/159.155 M.A.=50.265 …
6. ### Please check my math

A turnbuckle is needed to apply an 8kN force on a cable. If the efficiency of the turnbuckle is 40% and the force applied is 159.155N with a lever of 20cm in length. a)Find Mechanical Advantage: M.A.=Load/Effort M.A.=8000/159.155 M.A.=50.265 …
7. ### physics

it takes 100 N to pull and object up an inclined plane. the gravitional force on the object is 600 N what is the load force in this case?
8. ### physics

A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 2.00 m and the distance from the fulcrum to the load is 0.500 m. A graph of resistance force vs. effort force is shown. What is the …
9. ### physics

In using a pulley system, an effort of 100N is needed to raise steadily a load of 800N (a) what is the mechanical advantage?
10. ### Science

How much effort force would you have to use to lift a 800 newton load using a pulley system with a mechanical advantage of 4?

More Similar Questions