Physics

posted by .

A piece of clay is stuck to the edge of a potter's wheel. Draw a diagram to show the path of the clay if it comes unstuck while the wheel is rotating.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A potter’s wheel with rotational inertia of 45 kg m2, is spinning freely at 40 rpm. The potter drops a lump of clay onto the wheel where it sticks a distance 1.2 m from the rotational axis at the wheel’s center. If the subsequent …
  2. Physics

    I've been stuck on this problem for a while. Im not sure where to even begin. A bike wheel is rotating with an angular velocity of 3.1 rev/s. If the coefficient of kinetic friction between the wheel and brakes is .87, then find the …
  3. language

    Write the verb in each sentence. Write whether the action is past, present, or future 1. A Potter adds sand to the clay (adds, present) 2. Then he rolls the clay into long, pipe-shaped pieces. (Pipe-shape, past) 3.Another potters will …
  4. Physics

    A rotating uniform-density disk of radius 0.7 m is mounted in the vertical plane. The axle is held up by supports that are not shown, and the disk is free to rotate on the nearly frictionless axle. The disk has mass 5 kg. A lump of …
  5. Physics

    A rotating uniform-density disk of radius 0.6 m is mounted in the vertical plane. The axle is held up by supports that are not shown, and the disk is free to rotate on the nearly frictionless axle. The disk has mass 5.8 kg. A lump …
  6. Physics

    A potter’s wheel of radius 53.13 cm and mass 106.4 kg is freely rotating at 47.1 rev/min. The potter can stop the wheel in 5.65 s by pressing a wet rag against the rim and exerting a radially inward force of 66.2 N. What is the angular …
  7. physics

    A potter's wheel is rotating around a vertical axis through its center at a frequency of 1.8rev/s . The wheel can be considered a uniform disk of mass 4.7kg and diameter 0.34m . The potter then throws a 3.1kg chunk of clay, approximately …
  8. Advanced Physic

    A gob of clay, mass 217 g, falls from rest a distance 50 cm before striking and sticking to the edge of a wheel free to rotate about a horizontal axis through its center (Fig. 10-38). The wheel can be approximated as a solid disk of …
  9. Physics

    A potter is shaping a bowl on a a potter’s wheel. The wheel rotaes at a constant angular speed. The frictional force between her hands and the clay is 1.25 N. How large is the torque she produces on the wheel if the diameter of the …
  10. Physics

    A potter’s wheel with rotational inertia 24 kg m2 is spinning freely with no friction at 50 rpm. A piece of clay is dropped from above the wheel and sticks 0.5 m from the center of the wheel. Afterward, the rotational speed of the …

More Similar Questions