science
posted by Anonymous .
Three different resistors: 10 ohm, 20 ohm, and 20 ohm are connected in series, the overall resistance is:

science 
Anonymous
10 ohms
Respond to this Question
Similar Questions

physics (please check)
A total resistance of 3 ohms is to be producd by combining an unknown resistor R with a 12 ohm resistor. What is the value of R and how is it connected to the 12 ohm resistor a) 4.0 ohm parallel b) 4.0 ohm in series c) 2.4 ohm in parallel … 
physics
This is going to be hard to explain, but here goes! Four resistors, R1 = 30.0 ohm, R2 = 52.0 ohm, R3 = 93.0 ohm and R4 = 17.0 ohm, are connected to a battery with a terminal voltage of 18.0 V, as shown in the figure below. ____R1____R2__________ … 
physics
the table below shows the values of the resistance, capcitive reactance and inductive reactance for five RCL circuits. in which circuit will the voltage lead the current? 
physics
The load across a 12 V battery consists of a series combination of three resistors 21 ohm, 22 ohm, and 56 ohm. What is the total resistance of the load? 
physics
The load across a 12 V battery consists of a series combination of three resistors 21 ohm, 22 ohm, and 56 ohm. What is the total resistance of the load? 
science
Three different resistors: 10 ohm, 20 ohm, and 20 ohm are connected in parallel, the overall resistance is: 
physics
a 100 V DC signal is applied to four resistors as shown in Fig. 5. The values of the resistors are 20 ohm, 40 ohm, 60 ohm and 80 ohm. What is the voltage across the 40 ohm resistor? 
physix
three resistances of value 1 ohm, 2 ohm and 3 ohm are connected in parallel.If the effective resistance of the circuit has to be 1 ohm, the value of the resistance to be connected in series to this circuit should be? 
physics
Calculate the total resistance for a 650 ohm, a 350 ohm, and a 1000 ohm resistor connected in series. 
Chakote school solapur
if three resistors are connected in parallel there are 10 ohm 20 ohm and 60 ohm to a battery of 12 volt then find the effective resistance ?