Physics
posted by Melissa .
A square steel plate is 9.00 cm on a side and 0.600 cm thick. Assume that the plate is oriented with the square faces horizontal to the ground.
A. Find the shear strain that results if a force of magnitude 1.00×106 N is applied to the top square face of the plate, parallel to the side, and a force of equal magnitude is applied in the opposite direction to the bottom face of the plate as shown .
Note that the shear modulus of steel in pascals is 7.50×1010 Pa.
B. Find the displacement Delta x in centimeters.

help on this plz
Respond to this Question
Similar Questions

physics
If the ultimate shear strength of steel is taken to be 2.00 109 Pa, what force is required to punch through a steel plate 1.60 cm thick? 
physics
Find the shear strain that results if a force of magnitude 9.00×105 is applied to the top square face of the plate, parallel to the side, and a force of equal magnitude is applied in the opposite direction to the bottom face of the … 
physics
A manufacturer wishes to produce crude benzene models for the chemistry department. The manufacturer plans to do this by punching regular hexagons out of steel. If the steel plate is 0.500 cm thick, What is the minimum shearing force … 
physics
Comicbook superheroes are sometimes able to punch holes through steel walls. (a) If the ultimate shear strength of steel is taken to be 2.90 109 Pa, what force is required to punch through a steel plate 2.10 cm thick? 
physics
Assume that if the shear stress in steel exceeds about 4.00 108 N/m2, the steel ruptures. (a) Determine the shearing force necessary to shear a steel bolt 1.40 cm in diameter. (b) Determine the shearing force necessary to punch a 1.75cmdiameter … 
physics
Comicbook superheroes are sometimes able to punch holes through steel walls. (a) If the ultimate shear strength of steel is taken to be 3.00 x 10^9 Pa, what force is required to punch through a steel plate 1.90 cm thick? 
Physics
As a crude model for lightning, consider the ground to be one plate of a parallelplate capacitor and a cloud at an altitude of 590 m to be the other plate. Assume the surface area of the cloud to be the same as the area of a square … 
Materials Transport
You have a vertical plate which is 20 cm square and 0.75 cm thick. The plate has a thermal conductivity of 4 W/mK. The top edge of the plate is kept at a temperature of 325⁰C, and the bottom edge is kept at a temperature of 275⁰C. … 
Materials Transport
You have a vertical plate which is 20 cm square and 0.75 cm thick. The plate has a thermal conductivity of 4 W/mK. The top edge of the plate is kept at a temperature of 325⁰C, and the bottom edge is kept at a temperature of 275⁰C. … 
Calculus II
A square plate of side 3 m is submerged in water at an incline of 30 degrees with the horizontal. Calculate the fluid force on one side of the plate if the top of the plate lies at a depth of 6 m. (* The only thing i can think to use …