# PHYSICS

posted by .

A box is lifted with a pry bar, by slipping the bar under the box and lifting up on the bar. If the pry bar is 2m in length and it is grasped at the end, and the box is located at the opposite end, the fulcrum, with its center of gravity at a distance of 0.5 m from the fulcrum.

what is the size of the force required to lift the box if the box has a weight of 100N?

• PHYSICS -

.5*100=1.5* F solve for force F

• PHYSICS -

I THOUGHT IT WAS .5X100=50/2=25N

## Similar Questions

1. ### Physics

A 60-cm-long, 500 g bar rotates in a horizontal plane on an axle that passes through the center of the bar. Compressed air is fed in through the axle, passes through a small hole down the length of the bar, and escapes as air jets …
2. ### Physics

A bar of aluminum (bar A) is in thermal contact with a bar of iron (bar B) of the same length and area. One end of the compound bar is maintained at Th = 75.5°C while the opposite end is at 30.0°C. Find the temperature at the junction …
3. ### PHYSICS

A box is lifted with a pry bar, by slipping the bar under the box and lifting up on the bar. If the pry bar is 2m in length and it is grasped at the end, and the box is located at the opposite end, the fulcrum, with its center of gravity …

A box is lifted with a pry bar, by slipping the bar under the box and lifting up on the bar. If the pry bar is 2m in length and it is grasped at the end, and the box is located at the opposite end, the fulcrum, with its center of gravity …
5. ### physics

Hello everyone, I need help with this question: A bartender slides a glass of beer down a bar with an initial velocity of 2m/s. The coefficient of kinetic friction of the bar is 0.05 and the length of the bar is 3m and the height of …
6. ### Physics

Tapered bar with end load The small tapered bar BC has length L=0.1 m and is made of a homogeneous material with Young’s modulus E=10 GPa. The cross sectional area of the bar is slowly varying between A0=160 mm^2 (at B) and A0/2 …
7. ### physics

if theta is the angle between unit vectors A bar and B bar, then (1-A bar.B bar)/(1 plus A bar.B bar) is equal to
8. ### physics

The drawing shows a 156-kg crate hanging from the end of a steel bar (S = 8.1 x 1010 N/m2). The length of the bar is 0.117 m, and its cross-sectional area is 7.44 x 10-4 m2. Neglect the weight of the bar itself and determine (a) the …
9. ### physics

Suppose we wish to use a 4.0 m iron bar to lift a heavy object by using it as a lever. If we place the pivot point at a distance of 0.5 m from the end of the bar that is in contact with the load and we can exert a downward force of …
10. ### Vector , physics

In a regular hexagon ABCDEF prove that AB bar+AC bar +AD bar+AE bar+AF bar =6AO bar

More Similar Questions