# chemistry

posted by .

A 6.50 g piece of substance B was rolled out into a thin sheet measuring 24.0 cm x 18.0 cm.

a.) Calculate the volume of the sheet of metal. Show work; use labels.

[I also had to look at a graph, here is some information about substance B:
y=mx+b
m(slope): 8.52 g/cm^3
b(Y-Intercept): 2.64 g
Correlation: 1.00

• chemistry -

Divide the slop by y intercept...

## Similar Questions

1. ### chemistry

I don't even know where to begin to solve this problem please help A 6.5 g piece of copper was rolled out into a thin sheet measuring 24.0 cm x 18.0 cm. The density of copper is 8.90g/cm3 1. Calculate the volume of the sheet of metal …
2. ### chemistry

If a 190 mg piece of gold (density =19.32 g/cm^3) is hammered into a sheet measuring 2.3 x 1.0 ft, what is the average thickness of the sheet in meters?
3. ### Maths

A rectangualr metal sheet is 32m long, 16m wide and 12mm thick. Eight circular holes, each of diameter 3m are cut in the sheet, so that none of the holes overlap. Calculate the volume of metal remaining, correct to 3 decimal places …
4. ### calculus

a rectagular sheet of metal has perimeter 36 meters. maximize the volume if the sheet is rolled into a cylinder
5. ### Algebra

A box is to be formed from a rectangular piece of sheet metal by cutting squares measuring 5 inches on a side and then folding the sides. The piece of sheet metal is twice as long as it is wide. If the volume of the box is to be 1760 …
6. ### mathematical physics

A metal sheet has ,on the average , 5 defects per 1.0 m^2. Assuming a poisson distribution , calculate the probability that a 1.5 m^2 piece of the metal sheet will have at least 4 defects.
7. ### mathematical physics

A metal sheet has ,on the average , 5 defects per 1.0 m^2. Assuming a poisson distribution , calculate the probability that a 1.5 m^2 piece of the metal sheet will have at least 4 defects.
8. ### mathematical physics

A metal sheet has ,on the average , 5 defects per 1.0 m^2. Assuming a poisson distribution , calculate the probability that a 1.5 m^2 piece of the metal sheet will have at least 4 defects.
9. ### math

A rectangular piece of sheet metal is 4 ft longer than it is wide. (See the illustration.) The area of the piece of sheet metal is 96 ft2. Find its length and width
10. ### physics

A piece of uniform sheet metal measures 25 cm by 25 cm. If a circular piece with a radius of 5.0 cm is cut from the center of the sheet, where is the sheetâ€™s center of mass now?

More Similar Questions