physics

posted by .

You’re using a wedge to split a log. You are hitting the wedge with a large hammer to drive it into the log. It takes a force of 3500 N to push the wedge into the wood. If the wedge moves 0.2 m into the log, how much work have you done on the wedge?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    a 2kg block is placed on a frictionless wedge that is inclined at an angle of 60 degrees from the horizontal. if you release the block, it would slide down the wedge. it turns out that if you push the wedge to the right with acceleration …
  2. physics

    A 0.18 kg ball is placed in a shallow wedge with an opening angle of 110° For each contact point between the wedge and the ball, determine the force exerted on the ball. Assume the system is frictionless.
  3. physics

    If the length of the wedge is not given then what should we answer about that a partical is thrown horizontly hit the wedge or not?
  4. Physics

    A block of mass 0.4 kg rests on the inclined surface of a wedge of mass 1.7 kg. The wedge is acted upon by a horizontal force F~ and slides on a frictionless surface. The acceleration of gravity is 9.81 m/s2. If the coefficient …
  5. physcs

    A small block of mass m1 = 0.500 kg is released from rest at the top of a curve-shaped frictionless wedge of mass m2 = 3.00 kg, which sits on a frictionless horizontal surface as in the figure below. When the block leaves the wedge, …
  6. physics

    A 2.0 kg mass rests on a frictionless wedge that has an acceleration of 15 m/s2 to the right. The mass remains stationary relative to the wedge, moving neither higher nor lower. (a) What is the angle of inclination, θ, of the …
  7. Physics

    A block of mass 0.40 kg rests on the inclined surface of a wedge of mass 7.0 kg. The wedge is acted on by a horizontal force F with arrow and slides on a frictionless surface. a)If the coefficient of static friction between the wedge …
  8. physics

    A metal wedge can be used to split wood pieces. This one has a base only 2 inches across. The length of the wedge is 12 inches. The largest force you can exert with your hammer is 500lbs. As you pound your wedge into the wood, what …
  9. Physice

    A 10 cm long, 2 cm wide wooden wedge is pushed into a soft wood block.Calculate: 1. The velocity ratio of the wedge. 2. The load on the soft wood if the effort applied is 30 N (assuming the wedge is 100% efficient).
  10. physics

    A 2.0 kg mass rests on a frictionless wedge that has an acceleration of 15 m/s2 to the right. The mass remains stationary relative to the wedge, moving neither higher nor lower. (a) What is the angle of inclination, θ, of the …

More Similar Questions