physics

posted by .

In a device known as an Atwood machine, two masses m1=10kg and m2=20kg are connected by rope over a frictionless pulley. What is the acceleration of each mass if the rope is massless?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    An Atwood Machine has a pulley of radius Rpulley = 0.25m, and mass Mpulley = 6.0 kg with two blocks with masses m1 = 5.0 kg, and m2 = 10.0 kg. Treat the pulley as a uniform disk. a) Find the acceleration of each block. b) Find the …
  2. Physics

    A 100kg mass is connected to a 200kg mass by a massless rope. The two masses rest on a frictionless surface. A (massless)rope is then attached to the 200kg mass, and is pulled. The two mass system accelerates. What is the relationship …
  3. physics

    Atwood's Machine An Atwood's machine consists of two masses, and , connected by a string that passes over a pulley. If the pulley is a disk of radius and mass , find the acceleration of the masses.
  4. physics

    Two masses m and 2m are attached with each other by a rope passing over a frictionless and massless pulley. If the pulley is accelerated upwards with an acceleration ‘a’, what is the value of T?
  5. Physics

    Mass 1 and mass 2 are connected as shown by a massless, non-stretch rope that passes over a massless, frictionless pulley. The masses are on inclines which have friction. When the angles of the string are as given, mass 1 experiences …
  6. Physics

    Two masses, mA = 40.0 kg and mB = 55.0 kg, are connected by a massless cord that passes over a pulley that is free to rotate about a fixed axis. This device is known as an Atwood’s Machine. The pulley is a solid cylinder of radius …
  7. Physics

    Two masses ( 2.3 kg and 4.2 kg) connected by a massless rope hung over opposite ends of a frictionless pulley. Each mass is initially 1.50 m above the ground, and the top of the pulley is 6.5 m above the ground. What maximum height …
  8. physics

    an Atwood machine with two masses 6kg and 10kg. What is the tension in the chord connecting the masses. Assume the pulley is frictionless and the rope massless. Take g=9.8m/s2
  9. Physics

    In the figure, the two blocks are attached by a massless rope over a frictionless pulley, and block M1 slides on the table without friction. The masses of the blocks are: M1 = 8.10kg and M2 = 3.90kg. Calculate the tension in the rope. …
  10. physics

    Consider the system shown in the diagram. The pulley is a uniform cylinder with mass m3 = 0.60 kg and radius R = 4.0 cm, the other two masses are m1 = 2.5 kg and m2 = 1.0 kg, and á = 30o. Assume the rope is massless, there is no slipping …

More Similar Questions