Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Fluid Mechanics
Hydraulic Systems
if the large piston of a hydraulic press has an area of 60"(squared), what will be the total force upon it if a pressure of 15 psi is produced by the small piston?
1 answer
So, you have to divide the area by the force. Which gives you 90 degrees.
You can
ask a new question
or
answer this question
.
Related Questions
A hydraulic lift office chair has its seat attached to a piston with an area of
11.2 cm2 . The chair is raised by exerting force
A hydraulic lift has 1000 N applied to an input piston that has an area of 30 cm2.
What is the pressure exerted on the input
A hydraulic lift system has an input piston with an area of 0,5 m2 and an output piston whith an area of 2 m2.
What force is
a small piston in a hydraulic system has a force of 10 n and moves a distance of 100mm.calculate the force reqiured to move the
Calculate the force required to move a small pistons that has an area of 2m2,if the force of a large piston is 20n with an as
A hydraulic lift in a garage has two pistons: a small one of cross-sectional area 3.70cm2 and a large one of cross-sectional
in the hydraulic machine shown, you observe that when the small piston is pulled down 10cm, yhe large piston is raised 1 cm. if
A 104 N car is lifted by a manually operated hydraulic lift. The area of the shaft of the lift is 80 cm2; the
area of the piston
the small piston of a hydraulic press has an area of 2.0 cm and the large piston has an area of 16 cm if the small piston has a
In a hydraulic lift, the radii of the pistons are 2.93 cm and 10.1 cm. A car weighing W = 11.0 kN is to be lifted by the force