Physics
posted by Max .
1) Suppose that you wish to fabricate a uniform wire out of 1.15 g of copper. Assume the wire has a resistance R = 0.600 , and all of the copper is used.
(a) What will be the length of the wire?
m?
(b) What will be the diameter of the wire?
µm?
2) A rectangular block of copper has sides of length 5 cm, 18 cm, and 34 cm. If the block is connected to a 4.0 V source across two of its opposite faces of the rectangular block, what are the currents that the block can carry?
(a) the maximum current
A?
(b) the minimum current
A?
Respond to this Question
Similar Questions

Physics
You've made the finals of the Science Olympics! As one of your tasks, you're given 1.8g of copper and asked to make a wire, using all the metal, with a resistance of 1.3 Ohm. Copper has a density of 8900 kg/m^3. What length will you … 
physics
Suppose that you wish to fabricate a uniform wire out of 0.900 g of copper. Assume the wire has a resistance R = 0.500 , and all of the copper is used. (a) What will be the length of the wire? 
Physics
1) Suppose that you wish to fabricate a uniform wire out of 1.15 g of copper. Assume the wire has a resistance R = 0.600 , and all of the copper is used. (a) What will be the length of the wire? 
Physics
Two wires with the same resistance have the same diameter but different lengths. If wire 1 has length L1 and wire 2 has length L2, how do L1 and L2 compare if wire 1 is made from copper and wire 2 is made from aluminum? 
Physics
A copper wire has a resistance of 24 Ω at 20°C. An aluminum wire has three times the length and twice the radius of the copper wire. The resistivity of copper is 0.6 times that of aluminum. Both Al and Cu have temperature coefficients … 
Physics
What length of #22 B&S gauge copper wire is needed to make a resistance of 500 ohms? 
Physics
Suppose that you wish to fabricate a uniform wire out of 1 g of copper. (Resistivity = 1.72*10^8 Ohmm, density = 8.94*10^3kg/m^3). If the wire is to have a resistance of R = 0.5 ohm and all of the copper is to be used, how long is … 
Physics
You have a piece of copper with a volume of 2 cm3, and wish to form a wire having a resistance of 0.15 ƒ¶. How long should the wire be if the resistivity of copper is 1.72 ~ 108 ƒ¶. m? 
Physics
A length of copper wire is shaped into a single circular loop of circumference 63 cm, similar to that shown in the picture below. A magnetic field of strength 0.50 T is parallel to the normal of the loop. The copper wire has a resistance … 
Physics 2017
I have a coil of copper wire. I want to know the length of the wire in the coil. I do not wish to unwind the coil and measure the length directly. I find from a table of densities that the density of copper is 8.89x10^3kg/m^3. Explain …