physics

posted by .

If the torque required to loosen a nut on the wheel of a car has a magnitude of 40.1 N*m, what minimum force must be exerted by a mechanic at the end of a 38.2 cm wrench to loosen the nut?

  • physics -

    torque=force*arm=40.1*.382 N-m

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics- torque

    1. Find the magnitude of the torque produced by a 3.0 N force applied to a door at a perpendicular distance of 0.25 m from the hinge. 2. A simple pendulum consists of a 3.0 kg point mass hanging at the end of a 2.0 m long light string …
  2. physics

    1. It has been suggested that rotating cylinders about 11 mi long and 5.2 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals …
  3. physics

    1. It has been suggested that rotating cylinders about 11 mi long and 5.2 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals …
  4. Physics

    A bolt requires 15 Nm or torque to loosen it. How much force needs to be applied to a 20 cm long wrench to loosen the bolt?
  5. physics

    If the torque required to loosen a nut that is holding a flat tire in place on a car has a magnitude of 44 N · m, what minimum force must be exerted by the mechanic at the end of a 20 cm-long wrench to loosen the nut?
  6. physics

    If the torque required to loosen a nut that is holding a flat tire in place on a car has a magnitude of 31.0 N·m, what minimum force must be exerted by the mechanic at the end of a 34.0 cm lug wrench to accomplish the task?
  7. Physics

    A worker applies a torque to a nut with a wrench 0.430 m long. Because of the cramped space, she must exert a force upward at an angle of 59.5° with respect to a line from the nut through the end of the wrench. If the force she exerts …
  8. physics

    A worker applies a torque to a nut with a wrench 0.485 m long. Because of the cramped space, she must exert a force upward at an angle of 57.0° with respect to a line from the nut through the end of the wrench. If the force she exerts …
  9. Physics

    A motorist is trying to loosen a stubborn lugnut by standing on the end of a wrench. The wrench is inclined 33.8 degrees above the horizontal and the distance from the center of the nut to the end of the wrench is 0.60 m. Assuming …
  10. Physics

    If the torque required to loosen a nut that is holding a flat tire in place on a car has a magnitude of 31 N · m, what minimum force must be exerted by the mechanic at the end of a 24 cm-long wrench to loosen the nut?

More Similar Questions